抽象化

This guide covers the selection and use of procedures for testing solvent-based architectural coatings for exterior, インテリア, or both types of surfaces. The properties that can be checked by the test methods listed herein are as follows: liquid paint properties (skin, conditions in containers, coarse particles and foreign bodies, density or weight per gallon, fineness of dispersion, flash point, odor, 吸収, colorant) acceptance, dilution stability, packaging stability, thermal stability and settlement; Coating application and film formation characteristics (brush application performance, brush drag application performance, roll application performance, roll application performance, spray application performance, repair uniformity, 一貫性 (low shear viscosity), rheology of non-Newtonian liquids, anti-hang, leveling performance, and drying performance); The appearance of the dry film (color appearance, color difference by visual comparison, color difference measured using instruments, directional reflection, 光沢, 光沢, covering power and yellowness index); Properties of the dry film (耐摩耗性, 接着力, 柔軟性, resistance to household chemicals, color change of white enamel, washability and cleanability, resistance to foaming, 暴露, powdering, 検査, ひび割れ, erosion, ピーリング, mildew and smoke resistance); And coating analysis (chemical analysis, volatile content, non-volatile volume content, 含水量, pigment content, pigment analysis, non-volatile carrier content, carrier separation and non-volatile carrier identification). Use instruments to measure, directional reflection, 光沢, 光沢, shading power and yellowness index color difference); Properties of the dry film (耐摩耗性, 接着力, 柔軟性, resistance to household chemicals, color change of white enamel, washability and cleanability, resistance to foaming, 暴露, powdering, 検査, ひび割れ, erosion, ピーリング, mildew and smoke resistance); And coating analysis (chemical analysis, volatile content, non-volatile volume content, 含水量, pigment content, pigment analysis, non-volatile carrier content, carrier separation and non-volatile carrier identification). Use instruments to measure, directional reflection, 光沢, 光沢, shading power and yellowness index color difference); Properties of the dry film (耐摩耗性, 接着力, 柔軟性, resistance to household chemicals, color change of white enamel, washability and cleanability, resistance to foaming, 暴露, powdering, 検査, ひび割れ, erosion, ピーリング, mildew and smoke resistance); And coating analysis (chemical analysis, volatile content, non-volatile volume content, 含水量, pigment content, pigment analysis, non-volatile carrier content, carrier separation and non-volatile carrier identification). Color change of white enamel, washable and cleanability, resistance to foaming, 暴露, powdering, 検査, ひび割れ, erosion, ピーリング, mildew and smoke resistance); And coating analysis (chemical analysis, volatile content, non-volatile volume content, 含水量, pigment content, pigment analysis, non-volatile carrier content, carrier separation and non-volatile carrier identification). Color change of white enamel, washable and cleanability, resistance to foaming, 暴露, powdering, 検査, ひび割れ, erosion, ピーリング, mildew and smoke resistance); And coating analysis (chemical analysis, volatile content, non-volatile volume content, 含水量, pigment content, pigment analysis, non-volatile carrier content, carrier separation and non-volatile carrier identification).

ASTM D5146-19 溶剤ベースの建築用コーティングの標準テスト ガイド

この概要は、参照規格の簡単な概要です。. これは参照のみを目的としており、規格の正式な一部ではありません。; 使用および適用については、規格そのものの全文を参照する必要があります。. ASTM はいかなる種類の保証も行いません, 明示的または黙示的, この要約の内容が正確であることを示すものではありません, 完全または新しい.

ステップ 1: 範囲

1.1 This guide covers the selection and use procedures for solvent-based coatings for use on exterior, interior or both types of surfaces (ノートを参照してください 1). Tables 1 そして 2 list the attributes that can be checked or, in some cases, the relevant test procedures.

注記 1: 用語 “architectural coatings” used here combines the definition in the term D16 with the definition in the FSCT Paint/Coatings Dictionary as follows: “Organic coatings intended for field application to residential, commercial, indoor or outdoor surfaces, as compared to industrial coatings, institutional or industrial buildings.” They are protective and decorative finishes applied at ambient temperatures. Commonly referred to as trade sales coatings. ”

注記 2: Architectural coatings are designed to provide better performance than most conventional coatings as they are tougher, more resistant to stains and wear, covered by Guide D3730.

ASTM D5146-19 溶剤ベースの建築用コーティングの標準テスト ガイド

1.2 The following types of organic coatings are covered in this Guide:

(1) タイプ 1 internal low gloss wall finish,

(2) タイプ 2 Interior Gloss and Semigloss Wall and Trim Enamels,

(3) タイプ 3 exterior house and trim paint, そして

(4) タイプ 4 floor enamel, exterior and/or interior.

1.2.1 Each is used for construction by brush, ロール, spray or other methods to a material suitable for its type, including wood, plaster, wallboard, masonry, 鋼鉄, previously painted surfaces and other building substrates.

1.3 SI 単位で表される値は標準とみなされます。. 括弧内の値は参考値です。.

ASTM D5146-19 溶剤ベースの建築用コーティングの標準テスト ガイド

1.4 この規格は、すべての安全上の懸念に対処することを目的としたものではありません, もしあれば, その使用に関連する. 適切な安全性を確立するのは、この規格のユーザーの責任です。, 健康および環境慣行を確認し、使用前に規制制限の適用可能性を判断するため.

1.5 The international standard is based on internationally recognized standardization principles established in the “国際標準開発原則の決定, ガイドラインと推奨事項” 貿易の技術的障壁に関する委員会が発行 (未定) 世界貿易機関の.