意味と目的
5.1 この試験方法は、ガラスの危険レベルを決定するための構造化された手順を提供します。, glass systems and glass retrofit systems subjected to air explosion loads. Knowing the hazard level allows assessing the risk of personal injury and damage to facilities.

5.2 glass or glass material level does not mean that the danger of a single sample can resist its rating of 1.0 specific air blast. The probability that an individual glass or glass building specimen resists its rated specific air explosion increases in proportion to the number of specimens that successfully resist a given air explosion level up to its rated hazard level.

ASTM F1642-2017 空気流負荷下でのドアおよび窓ガラスおよびガラス組立システムの標準試験方法

の範囲
1.1 This test method specifies procedures for assessing the hazard of glass or glass systems to air explosive loads. The designated organization shall provide the air explosion load parameters. The glass system shall be as defined in Specification F2912.

1.2 from the method of the data obtained from the test is applied to use standard F2912 sure glass or glass, glass system transformation system risk level.

1.3 this test method allows with or without a frame system of glass for testing and rating.

1.4 the test method is designed to test and evaluation system of all glass, glass and glass systems, including but not limited to, made of glass, プラスチック, plastic cladding glass, sandwich glass, glass/plastic materials, organic coating glass and other are not directly connected to the glass or glass glass transformation system, such as explosion-proof, cable grid, shadows, and architecture.

1.5 Units-Values expressed in SI units or inch-pound units should be treated separately as standard values. The values specified in each system may not be exactly equivalent; したがって, each system should be used independently of each other. Merging values from both systems may result in non-compliance with the criteria. For the conversion of quantities in various measurement systems to SI units, see specification E699.

1.6 この規格は、すべての安全問題に対処することを目的としたものではありません, もしあれば, その使用に関連する. この国際規格の使用者には、適切な安全と健康慣行を確立する責任があります。, 使用前に適用範囲を制限する規制を決定します. セクションを参照 7 特定の危険性の説明については.