Electric pencil hardness tester
- 説明
- 問い合わせ
説明
Electric pencil hardness tester
導入:
This machine is specially used for all kinds of finished products, のような: mobile phone shell, MP3/MP4 shell, notebook computer shell and other kinds of home appliances digital product shell hardness test.The machine is electrically controlled, and the machine is driven by an AC speed-regulating motor to achieve left and right movement with low noise and stability.
Electric pencil hardness tester
技術的パラメータ:
Test Angle | 45 度 |
負荷: 調整可能な | 500g, 750g, 1000g |
Test platform moving speed | 5~100 RPM, 調整可能な |
Travel distance | 40んん |
プラットホーム | approx. 12x17cm, can be fixed sample |
電源 | 220V / 50Hz |
アクセサリー | 13 standard pencils, one for 6B~6H, one for 500g weight and two for 250g weight |
Electric pencil hardness tester
特徴:
- Suitable for testing the hardness of paint field, specifically used in metal coating, decorative materials, 合成皮革, 等.
- The test method of pencil hardness tester meets the requirements of ASTMD333, ISO15184, BS3900-E19, ECCA-T4/1 standard.
- Pencil hardness tester uses standard hardness to perform scratch test on the surface of tested products.To determine the surface hardness of the product according to the standard pencil hardness mark.
Electric pencil hardness tester
Test instructions:
The surface hardness of the coating layer is tested by scratching the surface of the coating layer with a hardness pencil. The hardness pencil is fixed at a 45° Angle, so that the front center of the pen is in contact with the surface of the coating layer, and the appropriate load is applied. According to a certain speed (JIS specification 0.5mm/ s), the test platform is moved to make the surface of the coating layer move through the pen center.The hardness of the coating is considered to be the softest pencil grade in which the coating does not cause damage (scratches)