의미와 목적

5.1 페인트의 브러시 저항이 증가함에 따라, any natural tendency of the painter to overapply the paint will decrease. When all other factors are held constant, increasing brush resistance will result in greater film thickness, resulting in improved durability and concealment. 반대로, it may sometimes be preferred to use a lesser degree of brush drag for easier application (즉., using a lesser degree of brush drag reduces the time and effort required to apply paint to a particular area).

5.2 This test method provides a standardized spawning procedure for assessing brush resistance as an alternative to the customary informal temporary procedure. The goal is to increase the reliability and precision of determining this feature as much as possible.

메모 1: Brush drag of paint is directly related to its high shear viscosity. There is generally good ranking order agreement between the results obtained by this method and the test method D4287. The sensitivity of this brushout method has been found to be sufficient to distinguish brush rates corresponding to high shear viscosity differences of not less than 0.3 poise (0.03 우선권). The cyclic data show that the ranking order agreement between the brush and viscosity methods is poor when latex and solve-based coatings belong to the same comparison group. This is due to the fact that the two paint types have significantly different rheological properties that can affect the relative perception of brush resistance. four

ASTM D4958-2016 “라텍스 페인트의 브러시성 비교”

범위

1.1 This test method is a standardized brushing procedure for comparing brush resistance of architectural solvent-based coatings.

1.2 With slight modifications, this test method is also applicable to solvent-based coatings.

1.3 SI 단위로 표현된 값은 표준으로 간주됩니다.. 괄호 안의 값은 참고용입니다..

1.4 이 표준은 모든 안전 문제를 다루기 위한 것이 아닙니다., 만약에 어떠한, 그 사용과 관련된. 적절한 안전 및 보건 관행을 확립하고 사용 전에 규제 제한의 적용 가능성을 결정하는 것은 이 표준 사용자의 책임입니다..