TABER 마모 시험기 소개:
이 기계는 가죽의 내마모성 테스트에 사용됩니다., 옷감, 페인트, 종이, 바닥 타일, 합판, 유리, 천연 고무, 등. 방법은 표준절단기로 시편을 절단하는 것이다., wear it with a specified type of grinding wheel, load it with a certain weight, and take out the specimen after the specified number of revolutions, observe the condition of the specimen or compare the weight difference before and after the test. Mainly test the wear resistance of the material, wear resistance with two standard small grinding wheels, calculate the importance of the material and see if there is damage after grinding.
Mainly used in leather, 가죽, 옷감, 페인트, 종이, floor, 합판, 유리, natural rubber suitcase, 양탄자, 의류, 유리, plastic coating, ceramic tile, metal coating, 페인트, 광택, decorative sheet, high pressure sheet, 플라스틱, 직물, elastic floor mat, traffic paint, anodized layer, blankets, 전자 부품, decorative board, wax, 라벨, leather cases, 치과 재료, Automotive interior decoration, 수지, furniture and research laboratories; Commodity inspection arbitration, 기술 감독 부서, 등. to detect the performance of leather products.

TABER wear testing machine calibration steps:
단계 1, set the rated revolution of the counter to 60r/min:
단계 2, press the RST key to clear the counter;
Step 3,Press the start button and start the stopwatch at the same time.
단계 4, the counter records to 60 RPM. The testing machine automatically stops, stops the stopwatch time;
단계 5, Record stopwatch time:
Repeat steps 2 에게 5 ~ 위에, both times should be within the range of 60s±2s.