의미와 용도

3.1 물분무 청소 (SSPC-TR2 / NACE 6G 198; SSPC-SP 5 (왑)/출생 WAB-1; SSPC-SP 10 (왑)/태어난 WAB-2; SSPC-SP 6 (왑)/NACE WAB-3; SSPC-SP 14 (왑)/NACE WAB-8); SSPC-SP 7 (왑)/NACE WAB-4 or not, (SSPC-SP WJ-1 / NACE WJ-1; SSPC-SP WJ-2 / NACE WJ-2; SSPC-SP WJ-3 / NACE WJ- 3; SSPC-SP WJ-4 / NACE WJ-4) 연마제, which can cause flash rust under certain environmental conditions. Inhibitors are used to prevent flash rust during drying and before coating. The inhibitor or the reaction product of the inhibitor on the substrate becomes part of the coating system. Coating properties may be affected by inhibitors. Soluble contaminants or unreacted inhibitors beneath the coating may cause premature failure.

3.2 The user or illustrator needs to determine the specific test method and exposure conditions to be used. Some of the referenced test methods may not be applicable to all types of coatings.

ASTM D5367-16 “표면에 적용된 코팅 평가에 대한 표준 관행은 물 또는 물/연마성 샌드블라스팅 시 강철의 순간 부식을 방지하기 위해 억제제로 처리됩니다..

범위

1.1 This practice includes procedures for assessing the compatibility of coatings to coatings used to prevent rust on steel prior to coating.

1.2 Inhibitors can be used with or without abrasive in combination with a water-sprayed cleaning surface treatment.

1.3 The paint manufacturer should be consulted to ensure the compatibility of the inhibitor with the paint.

1.4 이 표준은 모든 안전 문제를 다루기 위한 것이 아닙니다., 만약에 어떠한, 그 사용과 관련된. Users of this standard are responsible for establishing appropriate safety and health practices and determining the applicability of regulatory restrictions prior to use.