의미와 용도

5.1 이 테스트 방법은 재료의 자연 연소를 가속화하는 경향을 제공합니다., which can eventually lead to a fire. Suitable for liquids and pastes.

5.2 The spontaneous heating behavior of oil-based materials is affected by the availability of oxygen, the amount of desiccant present, the degree of polymerization of the oil, the surface area of the cellulosic material, the measures taken to prevent heat dissipation, and the amount of oil in contact with the cellulosic material. The degree of spontaneous heating is independent of the type of cellulosic material in contact with the oil-based material or whether the oil-immersed material is first air-dried. Small amounts of contaminants, 페인트와 같은, quartz powder, 흙, or desiccant (예를 들어, materials that may be found on dirty, oil-soaked rags), can act as catalysts for this reaction.

ASTM D6801-2015 예술 작품 및 기타 재료의 최대 자체 발열 온도를 측정하기 위한 표준 테스트 방법

단계 1: 범위

1.1 The test method includes a small-scale laboratory procedure to determine the self-heating tendency of oil-based materials exposed to high temperatures in air in a controlled semi-adiabatic system.

1.2 This test method was developed to address the urgent need to identify oil-based materials that may need to be labeled with a tendency to self-heating. Research based on this test method could allow the development of practices to identify such oil-based materials.

1.3 SI 단위로 표현된 값은 표준값으로 간주됩니다.. 괄호 안의 값은 참고용입니다..

1.4 이 표준은 모든 안전 문제를 해결하기 위한 것이 아닙니다., 만약에 어떠한, 그 사용과 관련된. 적절한 안전 및 보건 관행을 확립하고 사용 전에 규제 제한의 적용 가능성을 결정하는 것은 이 표준 사용자의 책임입니다.. Refer to Appendix X1 for specific safety issues related to the treatment of solvent-impregnated rags.