methods for water soluble substances in pigments
The determination of water soluble substances in the pigment industry is very important to ensure product quality. 이 논문에서는, two widely used methods for the determination of aqueous solubilies, cold extraction and hot extraction, are discussed, their principles, 악기, 재료, and experimental procedures are analyzed, and their applications are discussed.

1부: 소개
In the pigment industry, water soluble matter is a key performance parameter. The content of water soluble matter affects the use and performance of pigment. In order to accurately determine the content of water soluble substances in pigments, many different methods have been developed, among which cold extraction and hot extraction are common. These two methods are different in principle and application, this paper will compare and analyze them.

The second part: cold extraction
범위 및 설명: The cold extraction method is used to determine the soluble content of pigment samples in cold water. This method is suitable for certain inorganic pigments, such as cobalt blue, molybdenum chromium orange and lead chromium yellow.

기기 및 재료: laboratory analysis instruments, film filters, evaporating dishes, 물, 등.

판정방법: The sample is mixed with water, continuously stirred for 1 시간, and then filtered and evaporated filtrate to constant weight. The final water soluble content is determined by several heating and cooling processes.

결과가 표현됩니다: The content of water soluble matter is expressed by mass and is usually reported as a percentage.

참조 표준: GB 5211.1-2003 “Determination of water soluble pigments – Cold extraction method”.

판정의 비교 및 ​​적용

3부: thermal extraction method
범위 및 설명: The hot extraction method is used to determine the soluble content of pigment samples in boiling water. This method is suitable for most inorganic and organic pigments.

기기 및 재료: laboratory analysis instruments, film filters, evaporating dishes, 물, 등.

시험 방법: Mix the sample with water, boil for 5 분, and then cool. Filter filtrate and evaporate to constant weight. The final water soluble content is determined by several heating and cooling processes.

결과가 표현됩니다: The content of water soluble matter is expressed by mass and is usually reported as a percentage.

판정의 비교 및 ​​적용

4부: Comparison and application
Cold extraction method is suitable for some specific inorganic pigments, such as cobalt blue, molybdenum chromium orange and so on. It is a relatively simple method, but requires a long stirring and evaporation process.

The thermal extraction method is suitable for most inorganic and organic pigments and is a relatively rapid method, requiring only a short time of boiling.

Which method to choose depends on the type and nature of the pigment, as well as the time and resource constraints of the experiment. It is important to note that different methods may lead to slightly different results, so the method used needs to be specified when reporting water soluble content.

5부: 결론
The determination of pigment water soluble substance is a key step to ensure product quality. Cold extraction method and hot extraction method are two commonly used methods, and each has its own scope of application. The correct selection and application of these methods is essential for the pigment industry to ensure that products meet specific requirements, 제품 성능을 향상하다, 비용을 줄이다, 부정적인 환경 영향을 줄입니다.. 동시에, comparing the two methods helps to determine which method is more suitable for a particular pigment type.