TABER 마모 시험기는 가죽에 적합합니다., 옷감, 종이, 페인트, 합판, 가죽, 바닥 타일, 유리, 천연 플라스틱 등. 테스트 방법은 회전하는 샘플에 한 쌍의 연삭 휠을 장착하는 것입니다., 그리고 지정된 하중이 적용됩니다. 샘플이 회전할 때, 연삭 휠이 구동됩니다., 샘플을 착용하기 위해, 체중 감량은 시험 전과 후의 체중 차이입니다.. The abrasion tester produced by Taber is the most widely used instrument for product durability testing in the world. These products include plastics, 종이, 코팅, 직물, leather and flooring. Taber’s abrading machines, hardness testers, shear/scratch testers and more produce data in minutes rather than years of use.

Calibration procedure

(1) 첫 번째, set the rated revolution of the counter to 60r/min; 단계 2, press the RST key to clear the counter; 단계 3: Press the start button and start the stopwatch at the same time. The fourth step, when the counter records to 60 RPM, the testing machine automatically stops and stops the stopwatch time; Fifth, record the stopwatch time; Repeat steps 2 에게 5 ~ 위에, both times should be within the range of 60s±2s.

(2) Use electronic balance to weigh the mass of 2509 weights, 5009 weights, 7509 weights and 10009 weights respectively, and the mass of 2509 weights should be 2509+lg; The weight of 5009 should be 5009±29; The weight mass of 7509 should be 7509+29; The weight mass of 10009 should be 10009±29; If the requirements are not met, the quality of the weights should be increased or less adjusted, and then re-weighed after adjustment until the requirements are met.

TABER abrasion testing machine mainly through the way of rotary grinding, using different types of friction wheels on the sample rotation to detect the wear resistance of leather and plastic materials. Select the set of weights applicable to the standard to test the material characteristics. Detect weight loss on the outer surface of the sample, such as obvious mechanical damage.