ISO 1514-2016 “페인트 및 바니시 – 테스트용 표준 샘플”

서문
ISO (국제 표준화기구) 국가 표준 기관의 글로벌 연합입니다. (ISO 회원국). 국제 표준 개발은 일반적으로 ISO 기술 위원회를 통해 수행됩니다.. 기술위원회가 설치된 주제에 관심이 있는 각 회원 기관은 위원회에 대표될 권리가 있습니다.. 표준화 기구와 협력하는 정부 및 비정부 국제기구도 이 작업에 참여합니다.. ISO는 국제전기기술위원회(International Electrotechnical Commission)와 긴밀히 협력하고 있습니다. (IEC) 전기 표준화의 모든 문제에 대해.

이 문서를 개발하는 데 사용된 절차와 추가 유지 관리에 사용된 절차는 파트에 설명되어 있습니다. 1 ISO/IEC 지침의. 특히, 다양한 유형의 ISO 문서에 필요한 다양한 승인 기준에 주의를 기울여야 합니다.. 이 문서는 Part의 편집 규칙에 따라 작성되었습니다. 2 ISO/IEC 지침의 (iso.org/directives를 참조하세요.).

ISO 1514-2016 “페인트 및 바니시 – 테스트용 표준 샘플”

이 문서의 특정 내용에는 특허권이 적용될 수 있습니다.. ISO는 그러한 특허권의 일부 또는 전부를 식별할 책임이 없습니다.. 문서를 준비하는 동안 확인된 특허권에 대한 세부 정보는 ISO가 받은 특허 청구 목록 및/또는 서문에 나와 있습니다. (iso.org/patents 참조).

이 문서에 사용된 모든 상호는 사용자의 편의를 위한 정보로 제공되며 보증을 의미하지 않습니다..

For conformity assessment related ISO specific terminology and express the meaning of the specification, 무역 기술 장벽 관련 ISO뿐만 아니라 (TBT) adhere to the principle of the world trade organization (WTO) in the information, 다음 URL을 참고해주세요:iso.org/iso/foreword.html.

이 문서를 담당하는 위원회는 ISO/TC입니다. 35, 페인트 및 바니시, 소위원회 SC 9, 페인트 및 바니시의 일반 테스트 방법.

Fifth edition to cancel and replace the fourth edition (ISO 1514:2004), which is revised on technology, made the following changes:

ㅏ) the method of preparation of the zinc phosphate and chromate treatment, chromate conversion coating and acid chromium, remove;

비) to modify the following materials: coil coating board, plastic board, glass fiber reinforced plastic composite board, carbon fiber reinforced plastics (GRP) composite panels (CFP);

ISO 1514-2016 “페인트 및 바니시 – 테스트용 표준 샘플”

씨) The original annex B on the characteristics of zinc and zinc alloy coatings has been deleted;

디) A new annex B is added to the universal substrate surface board;

이자형) Normative references have been updated.

소개
For many of the most widely used test methods for paints and varnish, the type of panel used and the particular way in which it is prepared for use can greatly affect the test results. As carefully as possible before painting, 그러므로, standardization of panels and used for preparation procedure is very important.

It is not possible to include in international standards all the types of panels and preparations required for paint testing

This international standard describes preparation procedures that are known to be reproducible and provides additional guidance in cases where there may still be doubt due to a lack of international uniformity of procedures.

ISO 1514-2016 “페인트 및 바니시 – 테스트용 표준 샘플”

1 범위
This international standard specifies several types of standard panels and describes procedures for preparing them before painting. These standard panels are used for general test methods for paints, 바니시 및 관련 제품 (부록 B 참조).

2 규범적 참고자료
다음 문서는 일반적으로 이 문서의 전체 또는 일부를 참조하며 해당 응용 프로그램에 필요합니다.. 날짜가 있는 참고자료의 경우, 인용된 버전만 적용됩니다.. 날짜가 없는 참고자료의 경우, 새 버전의 참조 (모든 수정 사항을 포함하여) 적용됩니다.

ISO 1268 (all components), fiber-reinforced plasticsMethod for producing test plates

ISO 2409, 페인트 및 바니시 — Cross cut test

ISO 2808, 페인트 및 바니시 — 필름 두께 결정

ISO 1514-2016 “페인트 및 바니시 – 테스트용 표준 샘플”

ISO 4287, geometrical product specifications (GPS) – surface texture: profile method, terms, definitions, and surface texture parameters

ISO 8336, fibre cement plates-product specifications and test methods

ISO 11949, cold reduction electrolytic tin plate

안에 520, Gypsum plasterboardDefinitions, requirements and test methods

안에 622 (all components), fiberboard — 사양

안에 1396, Aluminium and aluminium alloyscoiled-sheet and strip for general applications – 사양

안에 10205, cold reduction blackboards in coil form for the production of tinplate or electrolytic chromium/chromium oxide coated steels

ISO 1514-2016 “페인트 및 바니시 – 테스트용 표준 샘플”

안에 13523-1, the coil coating metal – 테스트 방법 – 부분 1: thin film thickness

안에 13523-22, coil coated metals – 테스트 방법 – 부분 22: Chromatic aberration – 시각적 비교

안에 15283-2, fiber-reinforced plasterboarddefinitions, requirements and test methods – 부분 2: gypsum fiberboard

안에 16245-1, fiber-reinforced plastic compositesStatements on properties of raw materials – 부분 1: 일반적인 요구 사항

표준 정보 구성요소만 공개적으로 이용 가능합니다.. 전체 내용을 보시려면, 공식 채널을 통해 표준을 구매해야 합니다..

이 게시물을 공유하세요