Coating Thickness Gauge LT220
- 설명
- 문의
설명
Coating Thickness Gauge LT220
특징:
- Two measuring methods: magnetism induction(에프) and eddy current(N). When F probe is equipped, it can measure the non-magnetic coatings on magnetism substrate, when N probe is equipped, it can measure the non-conduction coating on non-magnetism substrate
- 8 types of probes are available for various application:F1,F1/90,F3,F10,F400,N1,N3,N400
- Two measuring modes:continue/single
- Two working modes: direct mode(DITECT) and Batch mode(APPL)
- 5 statistic ways:Mean values/Max.values/Min.values/Testing numbers(No.)/Standard deviations(S.Dev)
- Two measuring calibration modes
- With backlight display
- 640 measured values can be stored
- Low battery indication
- 2 switch off modes: manual and auto
Coating Thickness Gauge LT220
기술 사양
| 측정 범위 | See table in next page |
| Probe available | |
| 용인 | |
| Minimum resolution | |
| Measuring condition | |
| 작동 언어 | English/Chinese |
| 표준 | 에서,ISO,ASTM,학사 |
| 구경 측정 | Zero and foil calibration |
| 상호 작용 | USB |
| Statistic | Number of measurement, 평균, standard deviation, maximum and minimum |
| 데이터 메모리 | 640 판독값 |
| Limits | Adjustable with alarm |
| 전원 공급 장치 | NiMH rechargable battery |
| 치수(mm) | 230×86×47 |
| Operating environment | 온도:0~40 |
| 습기:20%~90% | |
| No strong magnetic field |
표준 배달
| NAME | NUMBER |
| Main unit | 1 |
| 조사(F1/N1) | 1 |
| Substrate | 5 |
| Calibration foil | 1 |
| Instruction manual | 1 |
| 통신케이블 | 1 |
| Dataview software | 1 |
