- 설명
- 문의
설명
IEC61032 tester 31 Test probe diameter 25MM grinding system dangerous mechanical parts test finger
Test tool 31 is designed and manufactured to meet the requirements of IEC61032&GB16842 표준, mainly used to test whether the dangerous mechanical parts of the grinding system of the residual food processing device are touched.
IEC61032 tester 31 Test probe diameter 25MM grinding system dangerous mechanical parts test finger
How to use:
25mm probe shall not touch dangerous mechanical parts
시험 중, 50N thrust may be applied, and the black baffle cannot fully enter the opening.
IEC61032 tester 31 Test probe diameter 25MM grinding system dangerous mechanical parts test finger\
기준을 만나십시오:
GB/T16842 그림 14 시험 31 and IEC61032 Figure 14 시험 31, 등
IEC61032 tester 31 Test probe diameter 25MM grinding system dangerous mechanical parts test finger
용도 및 목적:
To test whether hazardous mechanical parts of the milling system of the residual food handling unit have been touched
IEC61032 tester 31 Test probe diameter 25MM grinding system dangerous mechanical parts test finger
샘플 범위:
하우징의 충전부나 기계 부품에 쉽게 접근 가능
| 이름/모델 | Test rig 31/ HT-I14 |
| 프로브 직경 | Ф25±0.2 |
| Length of probe metal | 80±0.2 |
| Taper tip diameter | Ф60±0.2 |
| Taper tail diameter | Ф110±0.2 |
| Total length of the probe | 150±0.2 |
IEC61032 tester 31 Test probe diameter 25MM grinding system dangerous mechanical parts test finger
Test tool 31 is designed and manufactured to meet the requirements of IEC61032&GB16842 표준, mainly used to test whether the dangerous mechanical parts of the grinding system of the residual food processing device are touched.
IEC61032 tester 31 Test probe diameter 25MM grinding system dangerous mechanical parts test finger
How to use:
25mm probe shall not touch dangerous mechanical parts
시험 중, 50N thrust may be applied, and the black baffle cannot fully enter the opening.
IEC61032 tester 31 Test probe diameter 25MM grinding system dangerous mechanical parts test finger\
기준을 만나십시오:
GB/T16842 그림 14 시험 31 and IEC61032 Figure 14 시험 31, 등
