- 설명
- 문의
설명
JB-5C/6C ISO5436 간편한 조작 프로파일 거칠기 시험기
피roduct brief 나소개:
JB-5C/6C Profile roughness tester is a precision measuring instrument which is widely used in machining, 자동차, bearing, 공작기계, touch tools, precision hardware, optical processing and other industries.The instrument drive box provides high-precision linear reference guide rail with different specifications of 100, 120 그리고 150 mm. The sensor moves in a straight line along the guide rail.So we can set up X coordinate measurement units.The differential inductance sensors are used in Z axis from 10 mm to 20mm.The drive box can be adjusted horizontally ±10 degrees by the horizontal adjusting button.And can carry on the horizontal and the vertical direction movement respectively through the control box’s operation key or the software interface.The sample shape can be scaled up to any size.The measurement software under WINDOWS XP operating system is intuitive and convenient to operate.Rich function, 높은 정밀도, 좋은 안정성, and easy to print out and save files.
The roughness and contour shape parameters of various precision mechanical parts can be measured.The fitting method can be used to evaluate the radius, Angle treatment, circle treatment, point line treatment, Angle and distance from the center of two circles.Thus, shape parameters such as straightness, convexity, groove center distance, inclination, groove depth, groove width, groove edge distance, vertical distance from groove center distance, horizontal distance and step can be measured.
The performance of the instrument can be compared with that of foreign imported instruments. The instrument has reached the international standard in all aspects. The instrument conforms to the national standards GB/ t3505-2000, GB/ t6062-2001, GB/ t10610-1998, and the international standards ISO5436, ISO11562,ISO4287.See technical parameters for detailed indicators.
JB-5C/6C ISO5436 간편한 조작 프로파일 거칠기 시험기
명세서:
| 유형 | JB-5C | JB-6C |
| roughness test: | ||
| measuring parameter | 라,Rz,RT,RS,RSm,Rp,Rv,R최대,Rq,디,백금,Lr,Ln and Rmr(Tp)Curve Curve etc. | 라,Rz,RT,RS,RSm,Rp,Rv,R최대,Rq,Rpk,Rpv,Rk,Mr1,Mr2,D,백금,Lr,Ln and Rmr (T p) Curve etc. |
| Roughness profile graphics magnification | 10,20,50,100,200,500,1000,2000,5000,10000,20000,50000,100000,200000,500000 or automatic | |
| Roughness measuring range | 0.01 – 30 µm 이상 | |
| 샘플링 길이 | 엘: 0.08 ,0.25, 0.8, 2.5,8 mm | |
| 길이를 평가하려면 | Ln: 1엘, 2엘, 3엘, 4엘, 5L To choose | |
| 기기 평가 샘플링 | 100000 dot | |
| 해상도 비율 | 0.001 μm | |
| 표시 오류 | ± (5 %+4nm) | |
| Measurement repeatability | ± 3 % | |
| Measure the maximum height of the workpiece | 370mm | |
| Contour measurement range: | |||
| range of measurement: | 엑스:100mm Z:10mm | 엑스:120mm or 150mm (JB-6CA) Z:20mm | |
| Shape measurement function | element:Point, 선, 맨 위, valley, intersection, 연락하다, center line.Analysis: coordinate difference, 거리, 각도, radius, contour, 등. | ||
| Sensor range | 1mm(roughness),10mm(outline) | 1mm(roughness), 20mm(outline) | |
| Shape graphics magnification | 1,2,3,4,5,10,20,50,100,120,150,200,250,300,350,400,450,500 | ||
| Ratio of range to resolution | 65,536:1 | ||
| Axial measurement range | 100mm | 120mm | |
| Radius error | 0.1%-1.0% | ||
| Straightness measurement error | 1μm/40mm | ||
| sample rate | 0.25 밀리미터/초,0.5 밀리미터/초,1밀리미터/초 | ||
| 리프팅 속도 | 2mm/second | ||
| Up and down, left and right | 엑스:100mm Z: 370mm | 엑스: 120mm Z: 370mm | |
| The length of the needle | 18mm and 6.5mm | 30mm 그리고 12 mm | |
| Tip radius of stylus | 10μm | ||
| The Angle of the tip of the stylus | Long needle 16 도, short needle 30 도 | ||
| dynamometry | 0.01-0.02N | ||
| Instrument power supply | 220 VAC ±10%, 50헤르츠 |
| Marble table size | 700mm×400mm×100mm weight :150킬로그램 |
| 악기 및 총중량 | 200킬로그램 |
