TABER 마모 시험기는 완성된 신발 밑창과 형성된 바닥의 내마모성을 시험하는 데 적합합니다. (시트). 원리는 회전하는 숫돌을 시료에 수직으로 누르는 것입니다., 특정 하중에서 샘플에 대한 마모 테스트 수행, 특정 속도와 특정 시간, 테스트 마모 표시의 길이를 측정합니다..

TABER 마모 시험기는 제품의 내마모성을 평가하는 데 사용할 수 있습니다., as well as scratch resistance (single or multiple scratches) and color transmission. Both dry and wet wear tests can be carried out. IT is capable of testing samples of any size or shape, making it ideal for wear testing products with contoured and polished surface characteristics, such as computer mice and other computer or IT products.

TABER 마모시험기 시험방법

The multi-functional wear testing machine is a multi-functional type that can carry out alcohol or other liquid media and cotton cloth friction test, eraser friction test, pencil hardness friction test three typical wear tests. Suitable for plastic, 휴대폰 쉘, earphone shell screen printing, battery screen printing, keyboard printing, wire screen printing, leather and other electronic products surface spray, screen printing and other printing body for wear resistance, evaluation of its wear degree.

사용상의주의 사항:

1, power supply conditions: Please configure the correct power supply according to the nameplate of the machine.

The input voltage error range is ± 10%, and ensure that the machine should be correctly grounded to prevent damage caused by leakage.

2. Operating environment: 실온

3, should be placed on the horizontal table.

TABER 마모시험기 시험방법

시험 방법:

1, wear testing machine test method first turn on the dual power switch.

2, the workpiece to be tested is fixed on the workbench, and strive to keep its friction part and the rubber head vertical and reasonable range.

3, according to the requirements of different states and different products, directly enter the cycle number of required friction on the counter, under normal circumstances, you must press the RESET key to reset before setting the data.

TABER 마모시험기 시험방법

4, according to the different test range of different products, choose the suitable friction distance.

5, directly press the “Start” button to enter the normal state.

6, in the normal operation of the machine, if there is an abnormal situation, you can immediately press the “멈추다” 단추, at this time, all the operation of the machine will automatically stop. To restart, you need to repeatedly set the parameters (remaining values) for normal testing.

7, according to the selected number of friction after the operation is completed, you can make OK/NG judgment on the product according to the result.