TABER 마모 시험기로 시험하기 전, 장비의 테스트 암을 들어 올리십시오., 그런 다음 시운전을 위해 전원 공급을 시작하십시오.. 여기에서, 기계가 제대로 작동하는지 확인할 수 있어요. 그런 다음 테스트 암과 흡입 암을 들어 올리십시오., 고정너트와 개스킷을 제거하고 (반지) 표본의, 렌치를 사용하여 고정 링의 고정 나사를 풀고 고정 링을 집어 올리면 이 단계가 완료됩니다.. 정지 후, the operator can use a small brush to remove the sand layer on the leather surface, here it needs to be noted that together with double-sided tape to remove the specimen, and then weigh with a precision scale, also for recording, counting to four decimal places, according to the formula to calculate the test value.

TABER wear-resistant testing machine can test natural leather, 가죽, PU, two kinds of leather, artificial leather, textile materials, 유리, paint and other wear resistance test, the method is to take a diameter of 110mm circular sample according to the requirements, according to the relevant test standards with the corresponding load weight, set the corresponding test times, the machine will automatically stop when it reaches the set times. There is no need for personnel to stay for a long time, the instrument is controlled by the LCD screen, 조작은 간단하다, convenient and safe, and the instrument is stable and does not beat when running.

TABER 마모 시험기 8 점을 명심해야 한다

TABER 마모 시험기 8 점을 명심해야 한다

1. The instrument must be placed on a stable ground before use.

2. When the instrument is abnormal, please contact the department for timely processing;

3. Select the corresponding power supply voltage, do not be too high, to avoid burning the device;

4. It is not allowed to handle the machine during use;

5. The machine must have a good ventilation environment when working.

6. After each test, clean the machine and keep the machine clean;

7. Key mechanical components, due to the large operating load, the mechanical part please add lubricating oil in time;

8. The control box should be wiped with dry cloth, not wet cloth.