일상생활에서, 우리는 버튼에 익숙하다, 하지만 우리는 버튼 장력 시험기에 대해 모릅니다, 사실은, 의류의 다양한 버튼에 대해 균일한 수직 장력 테스트를 수행할 수 있습니다., 견고성이 관련 안전 표준을 충족할 수 있는지 테스트합니다.. 대부분의 경우, 우리 옷에는 단추가 있어, 가끔 버튼이 떨어져 나가기도 해요, 옷을 보기 흉하게 만들 뿐만 아니라 민망함을 주기도 합니다..

What is the role of the button tension testing machine?

특히, shirts, buttons are very much, in order to let everyone do not affect the use of embarrassment, before the factory, many manufacturers will use button tension testing machine to test, if not easy to fall, then regarded as qualified. The purpose of the button tension test is to define the responsibility of the garment manufacturer to ensure that the buttons, buttons and fasteners are properly fastened to the garment and to prevent the buttons from coming off the garment and creating a risk of organic ingestion by infants. 그러므로, the buttons, 의류의 단추와 잠금 장치는 단추 강도 테스터를 통해 테스트해야 합니다.. The machine can test the uniform vertical tension of the buttons on the clothing to check whether the degree can meet the relevant safety standards. Button tension machine is a very important standard for detecting the fixed strength of buttons and buttons, especially in the design and manufacturing of baby and children’s clothing.

What if the button falls off?

If the button is still in place, you can patch it up and sew it on with a needle. If a button falls out, you can go to a tailor’s shop and buy a new one and put it on. Mothers know that when buying clothes for their babies, they should pay special attention to the material and quality of the clothes. The baby’s skin is delicate and fragile, the clothing selection material is soft, good water absorption, good air permeability cotton or cotton wool fabric, and the suture can not be too hard. Generally good cotton surface has no defects, will not be particularly white, if the clothes are found to be particularly white, then it is likely to add fluorescent agents and other chemicals. Then choose the one without buttons.

Operation guide:

1. 고정물을 설치하세요, 테스트 버튼과 일치, 테스트 템플릿을 베이스에 고정합니다.

2. 고정 장치를 내려 놓으십시오., hold the buttons and pull them up. Each set of buttons should be able to withstand the pull of z less 17 파운드 (7.72킬로그램) 그리고 다음 기간 동안 개최되어야 합니다. 10 seconds without any looseness or damage.

3. 버튼 중 하나가 느슨하거나 손상된 경우, 또는 모두 교체 후 다시 테스트해야 합니다..