TABER wear testing machine introduction:
This machine is used for wear resistance test of leather, lap, verf, papier, vloertegel, multiplex, glas, natural rubber, enz. The method is to cut the specimen with a standard cutter, wear it with a specified type of grinding wheel, load it with a certain weight, and take out the specimen after the specified number of revolutions, observe the condition of the specimen or compare the weight difference before and after the test. Mainly test the wear resistance of the material, wear resistance with two standard small grinding wheels, calculate the importance of the material and see if there is damage after grinding.
Mainly used in leather, leer, lap, verf, papier, floor, multiplex, glas, natural rubber suitcase, carpet, kleding, glas, plastic coating, ceramic tile, metal coating, verf, vernis, decorative sheet, high pressure sheet, plastic, textiel, elastic floor mat, traffic paint, anodized layer, blankets, elektronische componenten, decorative board, wax, labels, leather cases, tandheelkundige materialen, Automotive interior decoration, resin, furniture and research laboratories; Commodity inspection arbitration, technische toezichtafdelingen, enz. to detect the performance of leather products.

TABER wear testing machine calibration steps:
Stap 1, stel het nominale toerental van de teller in op 60 tpm:
Stap 2, druk op de RST-toets om de teller te wissen;
Step 3,Press the start button and start the stopwatch at the same time.
Stap 4, the counter records to 60 toerental. The testing machine automatically stops, stops the stopwatch time;
Stap 5, Record stopwatch time:
Herhaal de stappen 2 naar 5 boven, beide tijden moeten binnen het bereik van 60s±2s liggen.