TABER slijtagetestmachine Deze 8 punten moeten in gedachten gehouden worden

Voordat u gaat testen met de TABER-slijtagetestmachine, til de testarm van de apparatuur op, en start vervolgens de voeding voor proefgebruik. Vanaf hier, Wij kunnen controleren of de machine goed werkt. Til vervolgens de testarm en zuigarm op, verwijder de bevestigingsmoer en pakking (ring) van het exemplaar, en gebruik de sleutel om de bevestigingsschroef van de bevestigingsring los te draaien en pak de bevestigingsring op om deze stap te voltooien. Na het stoppen, the operator can use a small brush to remove the sand layer on the leather surface, here it needs to be noted that together with double-sided tape to remove the specimen, and then weigh with a precision scale, also for recording, counting to four decimal places, according to the formula to calculate the test value.

TABER wear-resistant testing machine can test natural leather, leer, PU, two kinds of leather, artificial leather, textile materials, glas, paint and other wear resistance test, the method is to take a diameter of 110mm circular sample according to the requirements, according to the relevant test standards with the corresponding load weight, set the corresponding test times, the machine will automatically stop when it reaches the set times. There is no need for personnel to stay for a long time, the instrument is controlled by the LCD screen, de bediening is eenvoudig, convenient and safe, and the instrument is stable and does not beat when running.

TABER slijtagetestmachine Deze 8 punten moeten in gedachten gehouden worden

TABER slijtagetestmachine Deze 8 punten moeten in gedachten gehouden worden

1. The instrument must be placed on a stable ground before use.

2. When the instrument is abnormal, please contact the department for timely processing;

3. Select the corresponding power supply voltage, do not be too high, to avoid burning the device;

4. It is not allowed to handle the machine during use;

5. The machine must have a good ventilation environment when working.

6. After each test, clean the machine and keep the machine clean;

7. Key mechanical components, due to the large operating load, the mechanical part please add lubricating oil in time;

8. The control box should be wiped with dry cloth, not wet cloth.

Deel dit bericht