Znaczenie i cel
5.1 the contrast under specified film thickness is useful covering power parameters of production control and purchase specification.

5.2 the covering power, the greater the per unit area the less they get sufficient to cover the required coating. Dlatego, understanding the hiding power is important for coating cost and comparing coating value.

Zakres
1.1 These test methods determine and report the hiding power of powder coatings based on two parameters:

1.1.1 Metoda testowa A – Contrast at a given film thickness

1.1.2 Metoda testowa B — Film thickness with 0.98 (98%) contrast.

Notatka 1: measuring the parameters follow the powder coatings industry practice, measurement of hiding power and the relationship between film thickness, rather than test method D344 and D2805 as well as other hiding power test methods used in “spreading rate” funkcjonować.

ASTM D6441-2016 Test siły krycia powłoki proszkowej

Notatka 2: covering power by spectrophotometry is defined as 0.98 under the contrast of diffusion rate. Please refer to terms D16, D2805 and the Paints and Coatings Testing Manual for definitions of spreading rate and hiding power.

Notatka 3: A contrast ratio of 0.98 is generally accepted in the paint industry as representing “complete” concealing of a reflective hiding power measurement. But visually and photologically, it is slightly incomplete.

1.2 this test method covers the through the determination of electrostatic spraying of powder coatings covering power.

1.3 these test methods through reflection and thickness gauge measurement to determine the hiding power. They are restricted to coatings with a minimum CIE-Y reflectivity of 15%.

1.4 do jednostek SI uważa się za standardowe. Wartości podane w nawiasach służą wyłącznie celom informacyjnym.

1.5 Celem tej normy nie jest omówienie wszystkich kwestii związanych z bezpieczeństwem, Jeśli w ogóle, związane z jego użytkowaniem. Użytkownik tej międzynarodowej normy ma obowiązek ustanowić odpowiednie praktyki w zakresie bezpieczeństwa i higieny pracy, and determine regulations limit the applicability of before use premise.