przedmowa
ISO (Międzynarodowa Organizacja Normalizacyjna) to globalna federacja krajowych organów normalizacyjnych (Organy członkowskie ISO). Opracowywanie norm międzynarodowych odbywa się zwykle za pośrednictwem komitetów technicznych ISO. Each member group interested in a subject on which a technical committee has been established has the right to be represented on the Committee. International, governmental and non-governmental organizations in liaison with ISO are also involved in this work. ISO ściśle współpracuje z Międzynarodową Komisją Elektrotechniczną (IEC) we wszystkich kwestiach normalizacji elektrycznej.

Część 1 dyrektywy ISO/IEC opisuje procedury stosowane przy opracowywaniu tego dokumentu i dalszej konserwacji. W szczególności, note the different approval standards required for different types of ISO documents. This document has been drafted in accordance with the editorial rules in Part 2 dyrektywy ISO/IEC (zobacz iso.org/directives).

Należy pamiętać, że niektóre elementy tego dokumentu mogą być przedmiotem praw patentowych. ISO nie jest odpowiedzialna za identyfikację któregokolwiek lub wszystkich takich patentów. Details of any patent rights identified during the documentation development process will be included in the introduction and/or list of ISO patent claims received (zobacz iso.org/patents).

Any trade names used in this document are information provided for the convenience of the user and do not constitute an endorsement.

For an explanation of ISO specific terms and expressions related to conformity assessment, as well as information on ISO compliance with WTO principles in Technical Barriers to Trade (Do ustalenia), zobacz następujący adres URL: Przedmowa – Dodatkowa informacja

Komitetem odpowiedzialnym za ten dokument jest ISO/TC 256, Pigmenty, Dyes and increments.

ISO 18473 consists of the following parts under the general heading Functional pigments and increments for special applications:

— Część 1: Nanometer calcium carbonate for sealant applications

— Część 2: Nanoscale titanium dioxide for sunscreen applications

ISO 18473-1-2015 Funkcjonalne pigmenty i wypełniacze specjalnego przeznaczenia – Część 1: nanowęglan wapnia do zastosowań w uszczelniaczach

wprowadzić
Sealants are widely used to prevent air, gas or liquid infiltration into many industries, łącznie z budownictwem, automobiles and electronics. Increments are an important component of sealant formulations that reduce cost and improve rheological and mechanical properties. The content of increment agent varies widely and can be as high as 50% (mass fraction). A common additive in sealants is calcium carbonate (CaCO 3) because it is readily available in a variety of sizes and can be used as a rheological modifier, enhancer, and sunblock. Commercial calcium carbonate can be divided into heavy calcium carbonate (GCC) and precipitated calcium carbonate (PCC), with three crystal structures of calcite, aragonite and spheroid aragonite. It exists in various forms, such as cubic, spherical, spindle, fibrous and acicular. Calcium carbonate with calcite crystal structure and cubic or spherical form is most widely used in sealant applications.

Nanoscale calcium carbonate (NCC) provides improved performance and additional features for a variety of sealants, including thixotropy, flame retardant, and improved durability and recyclability, and has become a major ingredient in sealant formulations. Nanoscale calcium carbonate in powder form is now easy to manufacture, mainly through the precipitation route to control size and form. The importance of surface treatment for the use of NCC in sealants cannot be overstated. Natural calcium carbonate 3 is hydrophilic. W rezultacie, it tends to clump in organic polymers and plasticizers. NCCS, in particular, tend to aggregate more easily due to their small size and large surface area. NCCS are surface treated to give them hydrophobicity and improve their dispersion in hydrophobic systems. The surface treatment also improves the compatibility of the polymer matrix, thus improving the interface adhesion between the increment agent and the polymer.

It was found that the particle size, specific surface area, mass fraction, morfologia, wartość PH, magnesium content, oil absorption value, water content and other characteristics of the supplied nano-sized calcium carbonate affected the performance of the sealant mixed with these materials. Nanocząstki. The characteristics of NCCS that need to be detailed in relation to sealant performance arise from the following facts. Pierwszy, agreements between customers and suppliers do not always cover all material characteristics that affect sealant performance and/or machinability, or they are interpreted differently by customers and suppliers. Drugi, nanomaterials are relatively new. Material properties may depend on the technique used to measure them. So,

Ta część ISO 18473 lists the properties, measurements and characteristics of nanoscale calcium carbonate and is intended to aid its acceptance and application in sealants.

1 Szereg zastosowań
Ta część ISO 18473 specifies the requirements and corresponding test methods for powdered nano-sized calcium carbonate for surface treatments used in sealant applications.

2 Normative reference files
All or part of the following documents are conventionally referenced in this document and are required for the application of this document. Dla przestarzałych odniesień, obowiązują wersje zawierające wyłącznie cytaty. Za niedatowane cytaty, nową wersję odnośnego dokumentu (including any amendments) ma zastosowanie.

ISO 787-2, General test methods for pigments and increments-Part 2: Determination of volatiles at 105 °C

ISO 787-5, General test methods for pigments and increments – Część 5: Determination of oil absorption values

ISO 787-9, General test methods for pigments and increments-Part 9: Determination of the pH value of aqueous suspensions

ISO 3262-1, coating increments — Specyfikacja i metody badań — Część 1: Introduction and general test methods

ISO 3262-6, paint increments-specification and test methods-Part 6: Precipitated calcium carbonate

– ISO 9277, Wyznaczanie powierzchni właściwej ciał stałych metodą adsorpcji gazu – Metoda BET

ISO 15528, Malatura, lakiery i surowce do farb i lakierów – Próbowanie

ISO 18473-1-2015 Funkcjonalne pigmenty i wypełniacze specjalnego przeznaczenia – Część 1: nanowęglan wapnia do zastosowań w uszczelniaczach

3 Warunki i definicje
Na potrzeby tej części ISO 18473, zastosowanie mają następujące terminy i definicje.

3.1 Nanoscale

Rozmiary wahają się od około 1 nm do 100 nm

Notatka wpisowa 1: Attributes that are not extrapolated from a larger size are usually (but not limited to) displayed within this size range. For such attributes, the size limit is considered to be approximate.

Notatka wpisowa 2: The lower limit in this definition (około 1 nm) was introduced to avoid the designation of individual and small atomic groups as nanoobjects or nanostructured elements, which may imply that there is no lower limit.

3.2 Precipitate calcium carbonate

A synthetic calcium carbonate composed of triangular crystals (np., calcite) or diamond-shaped biconical crystals (np., aragonite)

Tylko standardowa sekcja informacyjna jest publiczna. Aby zobaczyć pełną treść, you will need to purchase the standard through the official channels.