Lista kluczowych właściwości i przyrządów do badania powłok ognioodpornych konstrukcji stalowych

Lista kluczowych właściwości i przyrządów do badania powłok ognioodpornych konstrukcji stalowych
Steel structure fireproof coating is a kind of coating that can protect steel structure from heat damage in fire. Its function is to prevent steel structure from losing bearing capacity under high temperature, so as to delay the spread of fire and reduce the loss of personnel and property. Steel structure fireretardant coatings are widely used in industrial buildings, commercial buildings, stadiums, high-rise buildings and other large public buildings.

Wydajność testu i instrument

Kluczowa wydajnośćInstruments and equipment
Grubość grubościMiernik gęstości
Fire resistance timeHot plate method equipment
Heat resistance stabilityHot air circulation furnace
Force of adhesionAdhesion testing machine
Density of densityMiernik gęstości
wartość PHMiernik PH
Odporność na promieniowanie UVUltraviolet radiation equipment
Corrosion resistance propertySalt spray test chamber

Krok wykrywania
The following are the specific detection steps:

Grubość: Use a thickness gauge to test the thickness of the coating, the test points should be evenly distributed on the surface of the coating, and the test results should be recorded.

Lista kluczowych właściwości i przyrządów do badania powłok ognioodpornych konstrukcji stalowych

Fire resistance time: The coating was tested using the hot plate method equipment by applying the coating to the hot plate and recording the time it takes for the coating to lose its bearing capacity by heating the hot plate.

Stabilność termiczna: The coating samples were tested in a hot air circulation furnace. Podczas testu, the surface temperature and appearance of the coating were observed to evaluate its thermal stability.

Przyczepność: The coating samples were tested using an adhesion testing machine to obtain their adhesion parameters to evaluate their adhesion ability.

Lista kluczowych właściwości i przyrządów do badania powłok ognioodpornych konstrukcji stalowych

Gęstość: Use a densitometer to test the density of the coating, and pay attention to eliminate the interference of bubbles during the test to ensure the accuracy of the test results.

wartość PH: Use a pH meter to test the pH value of the paint. Podczas testu, it is necessary to mix the paint sample with water before testing to ensure the accuracy of the test results.

Odporność na promieniowanie UV: Use UV radiation equipment to test the coating, podczas testu, it is necessary to observe the surface color and appearance of the coating to evaluate its UV resistance.

Anti-corrosion performance: Use the salt spray test chamber to test the coating sample. Podczas testu, it is necessary to place the coating sample in the salt spray test chamber to observe whether the coating surface is corroded to evaluate its anti-corrosion performance.

Podziel się tym postem