Description

IP30 test kit C test probe

IEC61032 test tool C diameter 2.5MM test probe can be equipped with thrust device IP30 protection class
I. Basic Introduction:

1. It is made according to GB/T4208-2008, IEC61032:1997, IEC60529:2001 and UL, etc.

2. Class C test probe (Class C test needle) is a necessary instrument for anti-shock protection test of household and similar electrical appliances.

IEC61032 test tool C diameter 2.5MM test probe can be equipped with thrust device IP30 protection class
Ii. Technical parameters:

IEC61032 test tool C diameter 2.5MM test probe can be equipped with thrust device IP30 protection class
Iii. Usage:
As shown in the figure, the joint part of the standard test finger shall not touch live parts or approach dangerous parts, and the 35mm round baffle shall not enter.

In the test requirements for preventing access to dangerous parts, type C and D test probes should be carried with 3±0.3N or 1±0.1N thrust.

Note: Please use with push tension meter without thrust.
Iii. Usage:
As shown in the figure, the joint part of the standard test finger shall not touch live parts or approach dangerous parts, and the 35mm round baffle shall not enter.

In the test requirements for preventing access to dangerous parts, type C and D test probes should be carried with 3±0.3N or 1±0.1N thrust.

Note: Please use with push tension meter without thrust.
​​​​​