Testador de ventosas automático LR-G006 ISO 1520
- Descrição
- Investigação
Descrição
Testador de ventosas automático LR-G006 ISO 1520
Single coating and coating used in the detection of the extension of the coatings on metal substrate and damage.
– motor drive the punch has a very high reproducibility
– no zero steel plate, automatic zero after test, no accumulated error
– position sensor with high precision, sag precision can reach 0.01 milímetros
– the attached standard 10 times with lamp magnifying glass, convenient observation and judgment test results
– the largest measured 1.25 mm thick plates
– digital display, all functions are controlled by two buttons
passos
Insert plates instrument openings, besmear level up
The power of the medium using the clamping device clamp plate
Start the cup drawing instrument, and through a magnifying glass observation test plate surface
At a constant speed is 0.2 mm/s automatic ball on top
Observed the first crack, immediately stop cup drawing instrument
Digital display screen read cup drawing depth values
At least three times of a test plate test
Testador de ventosas automático LR-G006 ISO 1520
Conform to the standard
GB/T 9753-2007 color paints and varnishes – cup drawing test
ISO 1520-2006
Testador de ventosas automático LR-G006 ISO 1520
Parâmetros técnicos
input voltage | 220V CA 50 Hz |
circular punch | Diâmetro 20 milímetros |
sag depth | Max depth15 mm |
The depth of the precision | Division value0.01 mm |
Dimensão | 230×360×430 mm |
peso | 35 kg |