Cortador de hachura cruzada LR-G008 HGQ
Complies with BS 3900;E6, ASTM-D 3359, BS/DIN EN ISO 2409.
This cutter is used for determining the parallel groove adhesion of one or many coating layers on a substrate, generally a metal panel. Cutter are available in 2 different blade versions, one is a multi-cut blade with 6 cutting edges, another has one cutting edge. The Cross-Cut Tester blades are made of hardened steel alloy. The blades are designed for retaining a sharp cutting edge and reduce the frequency of blade replacement.
- Descrição
- Investigação
Descrição
Cortador de hachura cruzada LR-G008 HGQ
Complies with BS 3900;E6, ASTM-D 3359, BS/DIN EN ISO 2409.
This cutter is used for determining the parallel groove adhesion of one or many coating layers on a substrate, generally a metal panel. Cutter are available in 2 different blade versions, one is a multi-cut blade with 6 cutting edges, another has one cutting edge. The Cross-Cut Tester blades are made of hardened steel alloy. The blades are designed for retaining a sharp cutting edge and reduce the frequency of blade replacement.
Cortador de hachura cruzada LR-G008 HGQ
To choose a right cutter.
ASTM-D 3359 requires 1 cutting edges | 1 mm cutter | for films up to 50 µm thick |
2 mm cutter | for films between 125 µm thick | |
ISO 2409 requires 6 cutting edges | 1 mm cutter | 0-60 µm,hard or soft substrates |
2 mm cutter | 61-120 µm,hard or soft substrates | |
3 mm cutter | 121-250 µm,hard or soft substrates |
Cortador de hachura cruzada LR-G008 HGQ
Operation
When using the 1mm spacing with 6 tooth blades, with the knife edges downward, pull the tool over the painted surface being tested; scratching the coating to the bottom. A second crosswise cut (at an angle of 45° or 90°) will produce a ruled area comprising 25 squares or diamonds. Evaluate the appearance or behavior of the coat of paint after some vigorous strokes with the stiff brush provided, or scratching with a fingernail (partial or complete flaking or peeling, no change, etc.). Also note the condition of the substrate (sand-blasted, primed or with a prime coat, degreased, pickled, etc.).
Encomenda.
Gato não | Descrição | Padrão | No.of Teeth | Cutting edges |
26511 | 1milímetros | ASTM | 11 | 1 |
26512 | 2milímetros | ASTM | 11 | 1 |
26521 | 1milímetros | DIN/ISO | 6 | 6 |
26522 | 1milímetros | DIN/ISO | 11 | 6 |
26523 | 2milímetros | DIN/ISO | 6 | 6 |
26524 | 2milímetros | DIN/ISO | 11 | 6 |
26525 | 3milímetros | DIN/ISO | 6 | 6 |