ASTM D5486/D5486M-2020 “Specificații standard pentru benzi sensibile la presiune pentru ambalare, Cutie CAPACE și Sigilii”
Abstract
This specification covers film, tipuri de hârtie și pânză de bandă sensibilă la presiune și se aplică pe ambalaje, box LIDS and seals. This specification covers five types of tape: impermeabil, weather-resistant, polyester-supported tape (Type I), water-resistant polyester-supported tape (Type II), water-resistant polypropylene supported tape (Type III), water-resistant woven fabric straps (Type IV) and weather-resistant paper straps. Tape should be manufactured using film, paper or cloth as backing and coated with a smooth and evenly distributed layer of pressure-sensitive water-insoluble adhesive. The tape should be rolled over the paper fiber or plastic core, and should be free of defects, and the edge should be clean, straight and unbroken. Test adhesion, breaking strength, tear resistance, grosime, water permeability,
This summary is a brief summary of the reference standards. It is informational only and not a formal part of the standard; The full text of the standard itself needs to be used and applied for reference. ASTM provides no warranties, expres sau subînțeles, și nu reprezintă că conținutul acestui rezumat este exact, complete, or new.
Etapa 1: Domeniul de aplicare
1.1 This specification covers film, paper and cloth pressure sensitive tape for box closure and sealing.
1.2 Values expressed in inch-pounds or SI units shall be treated as standards separately. The values specified in each system may not be exactly the same; Prin urmare, each system needs to be used independently and the values cannot be combined in any way.
1.3 The following safety hazard warnings apply only to Section 14 “Test Methods” din această specificație. This standard is not intended to address all safety concerns associated with its use. Este responsabilitatea utilizatorilor acestui standard să stabilească siguranța corespunzătoare, health and environmental specifications and to determine the applicability of regulatory restrictions prior to use.
1.4 Acest standard internațional se bazează pe principiile de standardizare recunoscute la nivel internațional stabilite în Decizia privind principiile pentru elaborarea standardelor internaționale., Guidelines and Recommendations issued by the WTO Technical Barriers to Trade (TBT) Committee.
ASTM D5486/D5486M-2020 “Specificații standard pentru benzi sensibile la presiune pentru ambalare, Cutie CAPACE și Sigilii”
2. Refer to the file
Federal regulation
FED-STD-595
PPP-T-60 Tape: Packaged, waterproof available from the Standardization document ordering desk Bldg. 4 D Block, 700 Robbins Ave., Philadelphia, PA 19111-5094, Attn: NPODS.
TAPPI standard
Internal Tear Resistance of T 414 hârtie (Elmendorf-type method) is available from the Pulp and Paper Industries Association (TAPPI), 15 Technology Parkway South, Norcross, GA 30092, http:// www.tappi.org.
ASTM standard
D996 Packaging and distribution environmental terms
D1974 Practice of methods for sealing, sealing and reinforcing fiberboard boxes
D2860 / D2860M Test method for bonding pressure-sensitive tape to fiberboard at a 90 degree Angle and under constant stress
Test method for peel adhesion of D3330 / D3330M pressure sensitive tape
D3611 pressure sensitive tape accelerated aging practice
Test method for thickness of D3652 / D3652M pressure sensitive tape
Test method for shear adhesion of D3654 / D3654M pressure sensitive tape
D3715 / D3715M pressure sensitive tape quality assurance practice
Test method for breaking strength and elongation of D3759 / D3759M pressure sensitive tape
Test method for unwinding force of D3811 / D3811M pressure sensitive tape
D3815 / D3815M Practice of accelerating weathering of pressure sensitive tape through open flame carbon arc exposure equipment
Test method for water permeability of D3816 / D3816M pressure sensitive tape
Test method for water vapor transmittance of D3833 / D3833M pressure sensitive tape
D3951 Commercial packaging specification
D4727 / D4727M Specification for corrugated and solid fiberboard sheets (container grade) and cut shapes
D5570 used as a test method for water resistance of tapes and adhesives for box covers