ISO 17895-2005 “Determinarea conținutului de compuși organici volatili în vopsele latex cu conținut scăzut de COV pentru culoare și lac (rezervor VOC)”

O prefață
ISO (Organizația Internațională pentru Standardizare) este o alianță globală a organismelor naționale de standardizare (organismele membre ISO). Elaborarea standardelor internaționale se realizează de obicei prin intermediul comitetelor tehnice ISO. Fiecare instituție membră interesată de un subiect pe care a fost înființat un comitet tehnic are dreptul de a fi reprezentată în comitet. În această activitate sunt implicate și organizații internaționale guvernamentale și neguvernamentale care colaborează cu organizațiile de standardizare. ISO lucrează îndeaproape cu Comisia Electrotehnică Internațională (IEC) în toate problemele de standardizare electrică.

International standards are drafted according to the rules given in Part 2 din Directiva ISO/IEC.

Sarcina principală a comitetului tehnic este de a elabora standarde internaționale. Draft international standards adopted by the Technical Committee will be circulated to member bodies for voting. Publicarea ca standard internațional necesită aprobarea de cel puțin 75% a instituţiilor membre.

Vă rugăm să rețineți că anumite conținuturi ale acestui document pot face obiectul drepturilor de brevet. ISO nu este responsabil pentru identificarea vreunuia sau a tuturor acestor drepturi de brevet.

ISO 17895 a fost dezvoltat de Comitetul Tehnic ISO/TC 35, Paints and varnishments.

ISO 17895-2005 “Determinarea conținutului de compuși organici volatili în vopsele latex cu conținut scăzut de COV pentru culoare și lac (rezervor VOC)”

Introducere
For health and environmental reasons, the requirements imposed by the authorities today include the assessment of the content of residual monomers and organic saturated volatiles, sometimes accurate to trace amounts.

This international standard is one of a series of standards dealing with the VOC content of paints, varices and related products: ISO 11890-1 (see bibliography) specifies the method for determining VOC content greater than 15% (by mass), ISO 11890-2 applies to VOC content between 0.1% și 15% (by mass).

This INTERNATIONAL standard describes a method for determining the VOC content between 0.01% și 0.1% (by mass). Spre deosebire de ISO 11890-1 și ISO 11890-2, this standard applies to volatile organic compounds with boiling points up to 250°C.

1 Domeniul de aplicare
This standard specifies a gas chromatographic method for the quantitative determination of volatile organic compound (COV) content (adică. the content of organic compounds with boiling points up to 250°C) in a low VOC content latex paint (rezervor VOC) under standard conditions (101,325 kPa). The method is suitable for VOC content ranging from 0.01% la 0.1% (by mass).

The main purpose of this method was to identify low VOC latex paints rather than conventional quality control.

2 referințe normative
The following references are required for the application of this document. Pentru referințe datate, se aplică doar versiunea citată. Pentru referințe nedatate, noua versiune a referinței (inclusiv orice revizuiri) se aplică.

ISO 2811-1, Vopsele și lacuri — Determinarea densității — Parte 1: Metoda sticlei cu greutate specifică

ISO 2811-2, Vopsele și lacuri — Determinarea densității — Parte 2: immersion (plonjare) metodă

ISO 2811-3, vopsele și lacuri — Determinarea densității — Parte 3: oscillatory method

ISO 2811-4, vopsele și lacuri — Determinarea densității — Parte 4: pressure cup method

ISO 3696, analytical laboratory water usespecifications and test methods

ISO 15528, Vopsele, lacuri si materii prime pentru vopsele si lacuri — Prelevarea de probe

ISO 17895-2005 “Determinarea conținutului de compuși organici volatili în vopsele latex cu conținut scăzut de COV pentru culoare și lac (rezervor VOC)”

3 Termeni și definiții
În sensul prezentului document, se aplică următorii termeni și definiții.

3.1 Volatile Organic Compounds

Any organic liquid and/or solid that evaporates spontaneously at the prevailing temperature and pressure of the atmosphere with which it is in contact

Notă 1: For current usage of the term VOC in the field of coatings, see Volatile Organic Compound content (VOC content).

Notă 2: Under U.S. government legislation, the term VOC is limited to those compounds that are photochemically active in the atmosphere (see ASTM D 3960). Any other compounds are then defined as exempt compounds.

[Sursă: ISO 4618]

3.2 Volatile organic compound content

The quality of volatile organic compounds present in the coating material, determined under the specified conditions

Notă 1: The nature and number of compounds to be considered will depend on the application area of the coating material. For each application area, limit values and determination or calculation methods are specified by regulation 1) or agreement.

[Sursă: ISO 4618]

3.3 Volatile organic compounds in the tank

Volatile organic compounds present in waterborne latex paint

3.4 Latex paint

The organic adhesive is a coating of water-based dispersion

[Sursă: ISO 4618]

3.5 Complete evaporation

Method of transferring VOC from liquid to gas phase in liquid sample

Notă 1: Although a headspace injector with a diaphragm sealed vial is used to introduce the test portion of the gas phase into the column, the complete evaporation method differs significantly from conventional headspace analysis where equilibrium is established. Since the sample bottle contains a very small amount of sample, almost all VOC will enter the gas phase when heated to a certain temperature [3].

ISO 17895-2005 “Determinarea conținutului de compuși organici volatili în vopsele latex cu conținut scăzut de COV pentru culoare și lac (rezervor VOC)”

3.6 Stock solution reference compound mixture

Mixtures prepared from pure substances for use in standard addition methods

Notă 1: The concentration of the reference compound mixture in the stock solution is determined by the initial mass number of each component in the sample and its purity.

3.7 Multiple standard addition methods

Method for determining the VOC content of a mixture of reserve compounds by adding known amounts of reference compounds to a sample

Doar componenta standard de informații este disponibilă publicului. Pentru a vedea conținutul complet, va trebui să achiziționați standardele prin canale formale.

Distribuie aceasta postare