Значение и цель
5.1 The ability of the coating to resist printing is important because its appearance can be adversely affected if the smoothness of the coating is altered by contact with another surface, especially with textured surfaces. Interior paint systems, especially gloss and semi-gloss on windowsills and other horizontal surfaces, on which objects such as flower POTS are often placed, can leave an irreversible impression. This tendency for paint films to “Распечатать” is a function of coating hardness, давление, температура, влажность, and the time the object is in contact with the painted surface.

АСТМ Д 2064-91-2016 “Стойкость к воздействию архитектурных покрытий”

Объем
1.1 This test method covers an accelerated procedure for assessing the printing resistance of architectural coatings. It differs from printing resistance test method D2091 in that the latter relates to lacquer finishes under packaging, transportation and storage conditions, while this test method relates to decorative coatings that have undergone random field pressure contact.

Примечание 1: Printing should not be confused with blocking, which is measured in test method D4946. The former involves the indentation of the surface, while the latter involves the bonding of two surfaces.

1.2 Values expressed in inch-pounds shall be considered standard. Значения, указанные в скобках, предназначены только для справки..

1.3 Настоящий стандарт не предназначен для решения всех вопросов безопасности., если таковые имеются, связанный с его использованием. Пользователи настоящего стандарта обязаны установить соответствующие правила техники безопасности и охраны труда, а также определить применимость нормативных ограничений перед использованием..