Перед испытанием на машине для испытания на износ TABER, поднимите испытательный рычаг оборудования, а затем включите источник питания для пробной эксплуатации. Отсюда, мы можем проверить, работает ли машина правильно. Затем поднимите испытательный рычаг и всасывающий рычаг., снимите фиксирующую гайку и прокладку (кольцо) образца, и используйте гаечный ключ, чтобы ослабить крепежный винт фиксирующего кольца и возьмите фиксирующее кольцо, чтобы завершить этот шаг.. После остановки, the operator can use a small brush to remove the sand layer on the leather surface, here it needs to be noted that together with double-sided tape to remove the specimen, and then weigh with a precision scale, also for recording, counting to four decimal places, according to the formula to calculate the test value.

TABER wear-resistant testing machine can test natural leather, кожа, PU, two kinds of leather, искусственная кожа, textile materials, стекло, paint and other wear resistance test, the method is to take a diameter of 110mm circular sample according to the requirements, according to the relevant test standards with the corresponding load weight, set the corresponding test times, the machine will automatically stop when it reaches the set times. There is no need for personnel to stay for a long time, the instrument is controlled by the LCD screen, операция проста, convenient and safe, and the instrument is stable and does not beat when running.

Машина для испытания на износ TABER 8 моменты надо иметь в виду

Машина для испытания на износ TABER 8 моменты надо иметь в виду

1. The instrument must be placed on a stable ground before use.

2. When the instrument is abnormal, please contact the department for timely processing;

3. Select the corresponding power supply voltage, do not be too high, to avoid burning the device;

4. It is not allowed to handle the machine during use;

5. The machine must have a good ventilation environment when working.

6. После каждого теста, clean the machine and keep the machine clean;

7. Key mechanical components, due to the large operating load, the mechanical part please add lubricating oil in time;

8. The control box should be wiped with dry cloth, not wet cloth.