АСТМ Д 4206-96-2018 Test for Continuous Combustion of Liquid Mixtures with a Miniature Cup Opener

Значење и сврха
4.1 Mixtures of flammable and non-flammable liquids, such as mixtures of alcohol and water, are classified by the US government according to the definition of flammable liquids based on the closed cup flash point method. Стога, mixtures can be classified as flammable even if they cannot withstand combustion. This test method determines the ability of a liquid mixture to sustain combustion and, when used in conjunction with the closed cup flash point method, indicates the flammability characteristics of the mixture.

АСТМ Д 4206-96-2018 Test for Continuous Combustion of Liquid Mixtures with a Miniature Cup Opener

Обим
1.1 This test method 2 describes the procedure for determining the sustained combustion characteristics of flammable and non-flammable liquid mixtures and mixtures containing liquids with very different flash points.

1.2 Values expressed in inch-pounds should be considered standard values. Вредности дате у заградама су математичке трансформације СИ јединица и служе само за референцу и не сматрају се стандардним.

1.3 This standard shall be used to measure and describe the reaction of materials, products or components to heat and flame under controlled conditions and shall not be used to describe or evaluate the fire hazard or fire risk of materials, products or components under actual fire conditions. Међутим, the test results can be used as elements of a fire hazard assessment or fire risk assessment, where all factors relevant to the assessment of fire hazard or fire risk for a particular end-use are taken into account.

1.4 Овај стандард није намењен решавању свих безбедносних питања, ако их има, повезана са његовом употребом. Одговорност корисника овог стандарда је да успостави одговарајућу безбедност, здравствене и еколошке праксе и да се утврди применљивост регулаторних ограничења пре употребе.

1.5 Овај међународни стандард је развијен у складу са међународно признатим принципима стандардизације утврђеним у Одлуци о принципима за израду међународних стандарда., Смернице и препоруке које је издао Комитет за техничке баријере у трговини Светске трговинске организације.

Дели овај пост