Значење и употреба

5.1 This test method is designed to measure volatile organic compounds emitted by packaging materials under high temperature conditions.

5.2 This test method may assist in the development and manufacture of packaging materials with minimal retention of packaging ink/adhesive solvents.

5.3 This procedure can be modified by using an appropriate qualitative GC detection device (на пример. a mass spectrometer) instead of a flame ionization detector to identify unidentified VOCs.

ASTM F1884-2018 Standard Test Method for the Determination of Residual Solvents in Packaging Materials

Корак 1: Обим

1.1 This test method covers a method for determining the amount of residual solvent released within the packaging material in a sealed vial at a given time and temperature conditions and is a proposed alternative to test method F151.

1.2 This test method covers procedures for quantifying volatile compounds whose identities have been determined and retained in the packaging material.

1.3 The analyst shall determine the sensitivity and reproducibility of the method by conducting appropriate studies of the target solvent. Analysts may refer to Convention E260 for guidance.

1.4 For the purpose of verifying identity or identifying unknown volatile compounds, analysts are encouraged to use gas chromatography/mass spectrometry, gas chromatography/infrared spectroscopy or other appropriate techniques in conjunction with this test method.

ASTM F1884-2018 Standard Test Method for the Determination of Residual Solvents in Packaging Materials

1.5 Due to variations in substrate/solvent interactions between different sample types, the sensitivity of this test method in determining a given retention solvent concentration needs to be determined on a case-by-case basis.

1.6 This test method does not address the problem of determining the total residual solvent in the packaging material. For this, techniques such as multiple headspace extraction can be employed. You can refer to the manual that comes with the GC-Automatic sampling system for guidance to the analyst.

1.7 Вредности изражене у СИ јединицама сматрају се стандардним.

1.8 Овај стандард нема за циљ да одговори на све безбедносне проблеме повезане са његовом употребом. Одговорност корисника овог стандарда је да успоставе одговарајућу безбедност, здравствене и еколошке спецификације и да се утврди применљивост регулаторних ограничења пре употребе.

1.9 Овај међународни стандард је заснован на међународно признатим принципима стандардизације утврђеним Одлуком о принципима за израду међународних стандарда, Смернице и препоруке које је издала СТО Техничке баријере у трговини (ТБТ) Комитет.

ASTM F1884-2018 Standard Test Method for the Determination of Residual Solvents in Packaging Materials

2. Погледајте фајл

АСТМ стандард

Е177 Пракса коришћења термина тачност и одступање у АСТМ методама испитивања

E260 packed column gas chromatography practice

Е691 Пракса спровођења међулабораторијских студија ради утврђивања тачности метода испитивања

Test method for residual solvents in F151 flexible barrier materials