Industrial oven is a kind of equipment used for baking, drying, излечење, heat treatment and other operations of large quantities of materials. It has a large studio volume and a high-power heating system that transfers heat quickly and evenly to the surface of the material for fast, efficient heating and handling.

Industrial ovens are usually composed of a heating system, a circulating fan, a control system, a studio and an inlet and outlet device. Heating systems usually use electric heating elements, gas furnaces, or steam heating to heat the air to a set temperature. The circulating fan can circulate hot air to improve thermal efficiency and baking effect. The control system can accurately control parameters such as temperature, humidity and time to meet the processing needs of different materials. The design and construction of studios and in-and-out devices also vary according to different use scenarios and material requirements.

Industrial oven common problems and solutions

П&А
Temperature control is unstable.

The temperature is too high or low.

Неравномерно загревање.

The oven door is not tightly sealed.

Too much noise.

solution
Temperature control instability: Проверите радни статус регулатора температуре и положај сензора да бисте утврдили да ли је контролер или сензор неисправан или треба да се замени. Проблем се може решити заменом или поправком одговарајућих делова, или поновно подешавање параметара контроле температуре.

If the temperature is too high or too low, check whether the heating power of the device meets the requirements and whether heating components are faulty or need to be replaced. Можете подесити снагу грејања и температуру уређаја, или замените компоненте грејања по потреби.

Uneven heating treatment: Check the working status and position of the heater to see whether the position and heating time of the heater need to be re-adjusted so that the items in the equipment can be evenly heated.

Improper sealing of the oven door: Check the sealing performance of the oven door to check whether the sealing strips are aging or need to be replaced. The problem can be resolved by replacing or servicing the relevant parts, or by readjugating the oven door.

Troubleshooting: Ако уређај прави превише буке, проверите да ли су напон напајања и кабл за уземљење уређаја нормални, and whether the heater or blower is faulty or needs to be replaced. Проблем се може решити заменом или поправком одговарајућих делова, или репозиционирање опреме.

The North and south tides remind you that industrial ovens require regular calibration and maintenance. Истовремено, потребно је редовно чистити унутрашњост опреме, проверите перформансе и стање грејача, контролор, сензора и друге опреме, и благовремено заменити или поправити неисправне делове. Додатно, препоручује се одржавање уређаја према упутству за употребу и упутствима за одржавање које је дао произвођач како би се осигурао дуготрајан стабилан рад уређаја.

Industrial oven common problems and solutions

Ствари које захтевају пажњу
In the process of using industrial ovens, такође треба обратити пажњу на следеће тачке:

Arrange the placement of the goods to be baked reasonably to ensure that the goods to be baked can be evenly heated and distributed.

Do not accumulate too much debris or items to be baked inside the oven to avoid equipment overload or overheating

Ensure that the device is well ventilated to avoid damage or fire caused by overheat or overload.

When using the device, follow the instructions and safe operation procedures to ensure safe and reliable operation.

When using the equipment, avoid placing wet items directly into the oven for heating to avoid equipment failure or damage due to excessive steam.

When using the equipment, care should be taken to avoid excessive baking, so as not to affect the quality and performance of baked goods.

Укратко, the industrial oven is a commonly used heating equipment, and it is necessary to pay attention to the use and maintenance of the equipment to ensure the stability and service life of the equipment. Истовремено, it is necessary to perform regular maintenance according to the manufacturer’s instructions and maintenance guidance to ensure the long-term reliable operation of the equipment.