увод
ИСО (Међународна организација за стандардизацију) је глобални савез националних тела за стандардизацију (Тела чланица ИСО). Развој међународних стандарда се обично спроводи преко ИСО техничких комитета. Свака институција чланица заинтересована за предмет за који је основан технички комитет има право да буде заступљена у тој комисији. Међународне владине и невладине организације које су у вези са ИСО такође су укључене у овај посао. ИСО блиско сарађује са Међународном електротехничком комисијом (ИЕЦ) о свим питањима електричне стандардизације.

Процедуре које се користе за израду овог документа и оне које се користе за даље одржавање описане су у Делу 1 ИСО/ИЕЦ директиве. Нарочито, треба обратити пажњу на различите критеријуме одобрења који су потребни за различите типове ИСО докумената. This document has been drafted in accordance with the editing rules of ISO/IEC Directive Part 2 (види исо.орг/дирецтивес).

Please note that certain elements of this document may be subject to patent rights. ИСО није одговоран за идентификацију било ког или свих таквих патената. Details of any patent rights identified during the preparation of the document will be found in the introduction and/or in the list of patent claims received by ISO (see iso.org/patents).

ИСО 9022-1-2016 “Optics and optical instruments – Environmental test methods – Парт 1: Дефиниција, scope of test”

Any trade names used in this document are provided for the convenience of the user and do not constitute an endorsement.

For a description of the meaning of specific ISO terms and expressions related to conformity assessment, and for information on ISO’s compliance with WTO principles in Technical Barriers to Trade (ТБТ), please see the following URL: Foreword – Supplementary information

The committee responsible for this document is ISO/TC 172, Optics and Photonics, Subcommittee SC 1, Basic Standards.

The third edition cancels and replaces the second edition (ИСО 9022-1:2012), which has been revised to reflect changes made to the ISO 9022 серије.

ИСО 9022 consists of the following parts under the general heading Optics and Photonics – Environmental Test Methods:

ИСО 9022-1-2016 “Optics and optical instruments – Environmental test methods – Парт 1: Дефиниција, scope of test”

– Парт 1: Defining and testing the scope

– Парт 2: Cold, heat and wet

– Парт 3: Mechanical stress

– Парт 4: Salt spray

– Парт 6: Dust

– Парт 7: Resistance to dripping or rain

– Парт 8: High internal pressure, low internal pressure, immersion

– Парт 9: Solar radiation and weathering

– Парт 11: Mold growth

– Парт 12: Pollution

– Парт 14: Dew, frost, ice

– Парт 17: Combined pollution, solar radiation

– Парт 20: Humid atmospheres containing sulfur dioxide or hydrogen sulfide

– Парт 22: Combination of cold, dry heat or temperature changes with bumps or random vibrations

– Парт 23: Low pressure combined with cold, ambient temperature and dry or humid heat

ИСО 9022-1-2016 “Optics and optical instruments – Environmental test methods – Парт 1: Дефиниција, scope of test”

увести
Optical instruments are subject to many different environmental parameters during use, which need to be resisted without significantly degrading performance and remaining within prescribed specifications.

The type and severity of these parameters depend on the conditions under which the instrument is used (на пример, in a laboratory or workshop) and its geographical location. In tropical and subtropical climates, the effect of the environment on the performance of optical instruments is completely different from that found when used in the Arctic region. Each parameter will have different overlapping effects on the performance of the instrument.

Manufacturers try to ensure that, naturally, users expect the instrument to be resistant to the rigors that its environment can bring throughout its life cycle. This expectation can be assessed by exposing the instrument to a range of simulated environmental parameters under controlled laboratory conditions. The severity of these diseases is often increased in order to achieve meaningful results in a relatively short period of time.

To evaluate and compare the response of optical instruments to appropriate environmental conditions, ИСО 9022 contains detailed information on many laboratory tests that reliably simulate a wide range of different environments. These tests are primarily based on IEC standards, modified if necessary to take into account the specific functions of the optical instrument.

ИСО 9022-1-2016 “Optics and optical instruments – Environmental test methods – Парт 1: Дефиниција, scope of test”

Due to the continuous progress in various fields, optical instruments are no longer just precision designed optical products, but also include other components from other fields, depending on their range of application. Стога, the main functions of the instrument will be evaluated to determine which international standard should be used for testing. If optical functions are important, then ISO 9022 is applicable, but if other functions take precedence, then appropriate international standards in the relevant fields should be applied. There may be situations where ISO 9022 and other appropriate international standards need to be applied simultaneously.

1 Домет
Овај део ИСО-а 9022 defines terms related to environmental testing of optical and photonic instruments, including other components from other fields (such as mechanical, chemical and electronic devices), and specifies the essential characteristics of testing.

2 Terms and definitions
For the purposes of this document, the following terms and definitions apply.

2.1 Environmental test

Laboratory simulations, often severe, of climatic, mechanical, biological, електрични (including electrostatic) and chemical environmental effects acting on specimens during assembly, storage, transport and handling in order to identify any changes in specimen behaviour within a short period of time

2.2 Optical Instruments

Instruments whose functions are primarily based on optical phenomena, consisting of multiple components and/or assemblies, lighting systems, instruments with light conduction, and instruments containing components and/or assemblies from other fields in addition to optical units

Example: electronic components.

2.3 Optical Components

A functional unit consists of a number of components, at least one of which has an optical function

ИСО 9022-1-2016 “Optics and optical instruments – Environmental test methods – Парт 1: Дефиниција, scope of test”

2.4 Components

< Optical Instruments &гт; The smallest unit, usually consisting of one piece and one material

2.5 Representative Samples

Samples that differ from components only in geometry

Example: optical parts or sheet metal.

2.6 Specimen

An instrument, component, assembly, or representative sample being tested

2.7 Testing

Procedure for determining and evaluating the effect of application parameters on sample characteristics

2.8 Regulation

The sum of the external influences acting on the specimen during the test, such as the method of adjustment and the severity of the application, and the sum of the internal influences arising from the operating state of the specimen, such as movement and/or temperature changes

2.8.1 Conditioning methods

Individual or combined environmental impacts of specimens submitted during testing

Example: Shock or damp heat.

ИСО 9022-1-2016 “Optics and optical instruments – Environmental test methods – Парт 1: Дефиниција, scope of test”

2.8.2 Severity

Contains all the individual numbers of parameters required for the test

Example: температура, влажност, adjustment time.

Белешка 1: The adjustment time (exposure time) is the minimum time when tolerances are not indicated in the relevant part of ISO 9022.

2.8.3 Running Status

Defines the state of the sample’s operating state during conditioning

Белешка 1: Distinguish three operating states: operating state 0, operating state 1, and operating state 2.

2.8.3.1 Operation Status 0

The condition of the specimen in the normal transport and/or storage container and/or transport package provided by the manufacturer respectively

2.8.3.2 Operation Status 1

The condition in which the specimen is unprotected and ready for operation but not connected to a power source

2.8.3.3 Operation Status 2

The state of the specimen during the test run for a period of time, which will be determined in the relevant specification

ИСО 9022-1-2016 “Optics and optical instruments – Environmental test methods – Парт 1: Дефиниција, scope of test”

Белешка 1: The mode of the operating state is given in the relevant specification. During operation, check whether the sample is working properly.

2.9 Exams and tests

Determine the characteristics and functions of the sample for subsequent evaluation

Белешка 1: There are three types of inspection and testing: visual inspection, functional testing and measurement.

2.9.1 Визуелни преглед

Inspection using the human eye as a detector

2.9.2 Function Test

Functional determination

ИСО 9022-1-2016 “Optics and optical instruments – Environmental test methods – Парт 1: Дефиниција, scope of test”

2.9.3 Меасуремент

To objectively determine the value of a physical quantity by comparing it with a specified quantity

2.10 Evaluation

Compare results measured during initial, intermediate and final tests or to specified tolerances

2.11 Related Specifications

Compile all data related to the sample and data required for testing

2.12 Environmental atmospheric conditions

Conditions are defined by a temperature range of 15 °C to 35 °Ц, with relative air humidity between 30% и 85%

Јаван је само одељак са стандардним информацијама. Да бисте видели цео садржај, морате купити стандард преко званичних канала.