ЈБ-5Ц/6Ц ИСО5436 Тестер храпавости профила лаког рада
- Опис
- Упит
Опис
ЈБ-5Ц/6Ц ИСО5436 Тестер храпавости профила лаког рада
Пroduct brief Иntroduction:
JB-5C/6C Profile roughness tester is a precision measuring instrument which is widely used in machining, automobile, bearing, machine tools, touch tools, precision hardware, optical processing and other industries.The instrument drive box provides high-precision linear reference guide rail with different specifications of 100, 120 и 150 мм. The sensor moves in a straight line along the guide rail.So we can set up X coordinate measurement units.The differential inductance sensors are used in Z axis from 10 mm to 20mm.The drive box can be adjusted horizontally ±10 degrees by the horizontal adjusting button.And can carry on the horizontal and the vertical direction movement respectively through the control box’s operation key or the software interface.The sample shape can be scaled up to any size.The measurement software under WINDOWS XP operating system is intuitive and convenient to operate.Rich function, високу прецизност, добра стабилност, and easy to print out and save files.
The roughness and contour shape parameters of various precision mechanical parts can be measured.The fitting method can be used to evaluate the radius, Angle treatment, circle treatment, point line treatment, Angle and distance from the center of two circles.Thus, shape parameters such as straightness, convexity, groove center distance, inclination, groove depth, groove width, groove edge distance, vertical distance from groove center distance, horizontal distance and step can be measured.
The performance of the instrument can be compared with that of foreign imported instruments. The instrument has reached the international standard in all aspects. The instrument conforms to the national standards GB/ t3505-2000, GB/ t6062-2001, GB/ t10610-1998, and the international standards ISO5436, ISO11562,ISO4287.See technical parameters for detailed indicators.
ЈБ-5Ц/6Ц ИСО5436 Тестер храпавости профила лаког рада
Спецификације:
| тип | JB-5C | JB-6C |
| roughness test: | ||
| measuring parameter | Ра,Рз,Рт,РС,РСм,Рп,Рв,Рмак,Рк,Д,Пт,Lr,Ln and Rmr(Tp)Curve Curve etc. | Ра,Рз,Рт,РС,РСм,Рп,Рв,Рмак,Рк,Рпк,Rpv,Рк,Mr1,Mr2,D,Пт,Lr,Ln and Rmr (T p) Curve etc. |
| Roughness profile graphics magnification | 10,20,50,100,200,500,1000,2000,5000,10000,20000,50000,100000,200000,500000 or automatic | |
| Roughness measuring range | 0.01 – 30 µm above | |
| Sampling length | Л: 0.08 ,0.25, 0.8, 2.5,8 мм | |
| To evaluate the length | Ln: 1Л, 2Л, 3Л, 4Л, 5L To choose | |
| Instrument evaluation sampling | 100000 dot | |
| resolution ratio | 0.001 µм | |
| indication error | ± (5 %+4нм) | |
| Measurement repeatability | ± 3 % | |
| Measure the maximum height of the workpiece | 370мм | |
| Contour measurement range: | |||
| range of measurement: | Икс:100мм Z:10мм | Икс:120mm or 150mm (JB-6CA) Z:20мм | |
| Shape measurement function | element:Point, line, топ, valley, intersection, contact, center line.Analysis: coordinate difference, distance, Угао, radius, contour, итд. | ||
| Sensor range | 1мм(roughness),10мм(outline) | 1мм(roughness), 20мм(outline) | |
| Shape graphics magnification | 1,2,3,4,5,10,20,50,100,120,150,200,250,300,350,400,450,500 | ||
| Ratio of range to resolution | 65,536:1 | ||
| Axial measurement range | 100мм | 120мм | |
| Radius error | 0.1%-1.0% | ||
| Straightness measurement error | 1μm/40mm | ||
| sample rate | 0.25 mm/sec,0.5 mm/sec,1mm/sec | ||
| Lifting speed | 2mm/second | ||
| Up and down, left and right | Икс:100mm Z: 370мм | Икс: 120mm Z: 370мм | |
| The length of the needle | 18mm and 6.5mm | 30mm and 12 мм | |
| Tip radius of stylus | 10μм | ||
| The Angle of the tip of the stylus | Long needle 16 степени, short needle 30 степени | ||
| dynamometry | 0.01-0.02Н | ||
| Instrument power supply | 220 VAC ±10%, 50Хз |
| Marble table size | 700mm×400mm×100mm weight :150кг |
| Instruments and gross weight | 200Кг |
