Опис

I.Product Name:Тестер храпавости површине(SRT-6210)

This instrument is compatible with four standards of site to measure surface roughness of various machinery-processed parts, calculate corresponding and clearly display all measurement parameters.

Multiple parameter measurement: Ра, Рз, Рк, Рт

Highly sophisticated inductance sensor

Four wave filtering methods : РЦ, ПЦ-РЦ,ГАУСС и Д-П

Built-in lithium ion rechargeable battery and control circuit with high capacity

Small in size, light in weight and easy to use

Can communicate with PC computer for statistics,printing and analyzing by the optional cable and the software for RS232C interface.

Manual or automatic shut down. The tester can be switched off by pressing the Power key at any time.On the other hand, the tester will power itself off about 5 minutes after the last key operation.

The tester can memorize 7 groups of measurement results and measuring conditions for later use or download to PC.

Metric /Imperial Conversion

II.Specifications:

Display: 4 digits, 10 mm LCD, with blue backlight

Параметерс: Ра, Рз, Рк, Рт

Measuring Range

Ра, Рк: 0.005-16.00um/0.020-629.9uinch

Рз,Рт: 0.020-160.0um/0.078-6299uinch

Прецизност: Not more than 10%

Fluctuation of display value: Not more than 6%

Сензор:Test Principle: Inductance type,

Radius of Probe Pin: 5један,

Material of Probe Pin: Диамонд,

Dynamo-measurement of Probe: 4мН(0.4гф),Probe Angle: 90

Vertical Radius of Guiding Head: 48мм

Maximum driving stroke: 17.5мм/0,7 инча

Cutoff length (л): 0.25мм / 0.8мм / 2.5mm optional

Дужина евалуације: 5л

Резолуција : .001um if reading less than 10um Evaluation length : 5 cut-off

0.01um if reading more than 10um but less than 100um

0.1um if reading more than 100um

Power Li-ion battery: rechargeable

Operating conditions:Temp. 0~50centidegree

Влажност <80%

Величина:140x57x48 mm (5.5×2.2×1.9 инч)

Тежина:approx 420 г