Synchronous thermal analyzer is a thermogravimetric analyzer (TG) and differential thermal analysis (DTA) or differential scanning calorimeter (DSC) combined into one, in the same measurement using the same sample can obtain thermogravimetric and differential thermal information. Synchronous thermal analyzer is widely used in the fields of metal, plastic polymer, paint, medicine, food, chemistry, glass and other materials. Through the synchronous thermal analyzer, the physical reaction of different materials at a certain temperature is measured, the corresponding measurement spectrum is obtained, and the data is analyzed, thus providing data basis for the research of materials and the improvement of product performance.

Synchronous thermal analyzer product introduction

What does a synchrothermal analyzer measure? The information of melting and crystallization process, crystallinity, glass transition, phase transition, reaction temperature and reaction heat, specific heat, oxidation stability, solidification and purity of the sample can be obtained by DSC signal. TGA signals can be used to obtain information about thermal stability, thermal oxygen stability, decomposition process, REDOX process, adsorption and desorption, water and volatiles, gasification and sublimation, composition analysis, effects of additives and fillers, reaction kinetics, etc.

How to operate synchronous thermal analyzer? The sample was put into an empty crucible, and another empty crucible was put into the balance in the furnace for reference, and the two crucible were put into the balance in the furnace, and the temperature, heating rate and other parameters were set, and then click the software for real-time collection. After the experiment, the spectrum was obtained for analysis.

Synchronous thermal analyzer product introduction

Synchronous thermal analyzer which brand is good? Regarding the selection of synchronous thermal analyzer, in fact, it is necessary to comprehensively consider the sample, the test temperature requirements required for the experiment, the manufacturer’s brand, the procurement budget, the performance advantages of the instrument, and after-sales service, etc., and Nanjing Exhibition as the manufacturer of synchronous thermal analyzer, also provides sample testing, through the actual measurement data, to intuitively make its selection more clear and accurate.

Synchronous thermal analyzer product introduction

What are the advantages of synchronous thermal analyzer? DZ-STA300 synchronous thermal analyzer, this is a high temperature synchronous thermal analyzer, the test temperature range is room temperature ~1550 degrees Celsius, the use of a new furnace body design, high insulation, high precision, while the use of open cover design, easy to test and place samples, place samples and furnace body contact, at the same time two-way control, you can set different heating speed. High heating speed, high stability, equipped with two gas automatic switching, flow meter control gas size, touch screen operation.