İTİBAREN 53211-1987 “Determination of flow time using DIN flow cups for paints, varnishes and similar coating materials”
Boyalar, varnishes and similar coating materials use DIN flow cups to determine flow times
Revised: 1987 Düzenleme, Haziran 1987
Yayın tarihi: Haziran 1987
Status: Replacement:
Alternative: EN ISO'NUZ 2431
Document language: İngilizce
Published by: Deutsche Institut fur Normung EV (İTİBAREN)
Number of pages: 6
ANSI approval: HAYIR
Description/Summary:
Scope and field of application
Determination of paint flow time. Varnishes and similar coatings are used to obtain characteristic values that can be used as a simple aid in assessing the fluidity and suitability of such products.
İTİBAREN 53211-1987 “Determination of flow time using DIN flow cups for paints, varnishes and similar coating materials”
DIN flow cups are not suitable for determining flow rates of less than 25 saniye (corresponding to kinematic viscosity of about 90 mm2/s). When using an ISO 2431 flow cup, the flow time should not exceed 150 saniye (equivalent to a kinemical viscosity of approximately 700 mm2/s).