ASTM D3759/D3759M-2019 “Standard Test Method for Breaking Strength and Elongation of Pressure Sensitive Tape”
Значення і використання
5.1 The information provided by this test method can be used for material specifications for product design and quality assurance applications. Can be used to compare different products.
5.2 The use of the test method must be related to the test purpose. One purpose is to determine the relative strength of the tape at the time of purchase or use. Another aim is to identify or characterize a specific backing material.
5.2.1 The test may be performed on the received tape, тобто. the material is not cut into a sample width less than the received width. Generally, tapes wider than 48 мм [2 в] are not tested, mainly due to equipment limitations. Tape that is about 3 мм [0.125 в] narrow can be tested.
5.2.2 Tests may be performed on samples cut within the boundaries of the sample material using a sharp razor, such as the blade defined in Section 6. This method is commonly used for material characterization, determining consistent quality, and conforming to specifications.
5.3 Elongation at break or tensile properties up to a specified elongation may be related to the intended use of the tape or to its use in identifying or characterizing the material.
ASTM D3759/D3759M-2019 “Standard Test Method for Breaking Strength and Elongation of Pressure Sensitive Tape”
Крок 1: Область застосування
1.1 This test method covers the measurement of the breaking tensile strength (міцність на розрив) and tensile properties (подовження) of pressure-sensitive tapes and labels. It includes programs for machine orientation and transversal, high strength filament reinforced backing and high elastic backing. It also includes the process of obtaining the force (” Ф “value) of the specified elongation. These programs use a constant rate of expansion (CRE) type test machine.
1.2 Values expressed in SI units or inch-pound units shall be regarded as standard values respectively. The values specified in each system may not be exactly the same; The conversion between measurement systems needs to be done carefully.
1.3 Цей стандарт не призначений для вирішення всіх проблем безпеки, пов’язаних з його використанням. Користувачі цього стандарту несуть відповідальність за встановлення належної безпеки, специфікації щодо здоров’я та навколишнього середовища, а також для визначення застосовності нормативних обмежень перед використанням.
1.4 Цей міжнародний стандарт базується на міжнародно визнаних принципах стандартизації, встановлених у Рішенні про принципи розробки міжнародних стандартів, Настанови та рекомендації, видані СОТ щодо технічних бар'єрів у торгівлі (TBT) Комітет.
ASTM D3759/D3759M-2019 “Standard Test Method for Breaking Strength and Elongation of Pressure Sensitive Tape”
2. Зверніться до файлу
AFERA document (European Manufacturers Association, European Adhesives Association, Europe
AFERA 4004 Measurement of the breaking strength of self-adhesive tape
AFERA 4005 Self-adhesive tape elongation measurement
PSTC Paper (Pressure Sensitive Tape Committee)
Tensile strength and elongation of PSTC 131 pressure sensitive tape
European Specification (IN) document
IN 1940 Measurement of the breaking strength of self-adhesive tape
IN 1941 Measurement of elongation at break of self-adhesive tape
Стандарт ASTM
D828 Test method for tensile properties of paper and paperboard using constant elongation equipment
D882 Test method for tensile properties of plastic sheet
D996 Packaging and distribution environmental terms
D3715 / D3715M pressure sensitive tape quality assurance practice
D4332 Practice of regulating containers, packaging or packaging components for testing
E4 testing machine force verification convention
E122 Practice of calculating sample sizes to estimate average values of batch or process features with specified precision