意义和目的
5.1 基于三个刺激值 X 的原始 CIE 色标, 是, Z and chromaticity coordinates x, y is not visually uniform. Each subsequent color scale based on CIE values applies a weighting factor to provide a degree of uniformity so that the color differences across regions of the color space will be more comparable. 另一方面, it is unlikely that the same color differences obtained for the same samples evaluated in different color scale systems. 为避免混淆, comparisons should be made only when color differences or associated tolerances between samples are obtained for the same color scale system. For all colors of the specimen, there is no simple factor that can be used to precisely convert the color difference or color tolerance in one system into units of difference or tolerance in another system.

5.2 Color Difference E00 in Δ is highly recommended to use units (6) E* blood group units in the range of 0.0 to 5.0Δ. This color difference equation is applicable and widely used in industrial and commercial applications, including but not limited to automotive, 涂料, 化妆品, 油墨, 包装, 油漆, 塑料, 印刷, security and textiles.

5.3 Users of the color tolerance equation have found the addition of the three vector color difference components into a single scalar value in each system to be very useful in determining whether the sample color is within the tolerance specified by the standard. 然而, in order to control for color in production, 可能不仅需要知道与标准的偏差程度, 还有这个偏差的方向. Information about the direction of small color differences can be included by listing the components determined by the three instruments for color differences.

5.4 Color tolerance selection based on instrument values should be carefully related to a visual assessment of the acceptability of hue, 使用实践 D1729 获得的亮度和饱和度差异. 这里提出的三个公差方程已经针对纺织品和塑料的此类数据进行了广泛的测试, 并已被证明与视觉评估一致, within the experimental uncertainty of visual judgments. This means that the equation itself misclassifies color differences whose frequencies are no greater than those of very experienced visual color matchers.

5.5 Although color difference and color tolerance equations are commonly applied to a variety of light sources, they have been derived or optimized, 或两者, for daylight illumination. A good correlation with visual judgment may not be obtained when calculations are performed using other light sources. The use of tolerance equations in conditions other than daylight conditions requires visual confirmation of homochromic levels according to practice D4086.

美国材料试验协会 2244-2022 “使用仪器色坐标计算颜色允许限度和色差”

范围
1.1 This practice includes the calculation of color tolerances and small color differences between opaque specimens, such as painted panels, plastic patches or textile samples, based on color coordinates measured by an instrument based on daylight illumination. Practice D4086 should be used to verify instrumental results if it is suspected that specimens may be metamorphic, 那是, have different spectral curves despite visually similar colors. The tolerances and differences determined by these procedures are expressed in CIE 1976 CIELAB manual color space (1), 2 CMC tolerance units (2), CIE94 tolerance units (3), DIN99o color difference formula given in DIN 6176 (4), or approximately uniform visual color vision in CIEDE2000 color difference units (5).

1.2 For the Product specifications, the Buyer and the Seller shall agree on the allowable color tolerance between the specimen and the reference and the procedure for calculating the color tolerance. Specific color tolerances may be required for each material and use condition, as other appearance factors (例如, sample proximity, 光泽度, 和纹理) may affect the correlation between the size of the measured color difference and its commercial acceptability.

1.3 本标准并非旨在解决所有安全问题, 如果有的话, 与其使用相关. 本标准的使用者有责任建立适当的安全机制, 健康和环境实践，并在使用前确定监管限制的适用性.

1.4 本国际标准是根据《关于制定国际标准的原则的决定》中确立的国际公认的标准化原则制定的, 世界贸易组织贸易技术壁垒委员会发布的指南和建议.