国际标准化组织 22553-3-2019 “用于油漆和清漆的电镀涂料 – 部分 3: 电镀涂料与参考油的相容性”

介绍

国际标准化组织 (国际标准化组织) 是一个由国家标准机构组成的全球联盟 (ISO成员机构). 国际标准的制定通常通过ISO技术委员会进行. 每个对已成立技术委员会的主题感兴趣的成员团体都有权在委员会中派代表参加. 国际组织, 与ISO有联系的政府和非政府组织也参与了这项工作. ISO 与国际电工委员会密切合作 (国际电工委员会) 关于电气标准化的所有问题.

部分 1 ISO/IEC 指令的描述了用于制定本文件和进一步维护的程序. 尤其, 应注意不同类型ISO文件所需的不同批准标准. 本文件根据 ISO/IEC 指令部分的编辑规则起草 2 (请参阅 iso.org/directives).

请注意,本文档的某些内容可能是专利权的主题. ISO 不负责识别任何或所有此类专利. Details of any patent rights identified during the development of the document will be found in the introduction and/or list of ISO Patent declarations received (参见 iso.org/patents).

国际标准化组织 22553-3-2019 “用于油漆和清漆的电镀涂料 – 部分 3: 电镀涂料与参考油的相容性”

本文档中使用的任何商品名称均作为信息提供,以方便用户,并不构成认可.

Voluntary interpretation, 相关标准和合格评定相关的ISO特定术语和表达的含义以及ISO在技术性贸易壁垒中的含义 (技术性贸易壁垒) 坚持世界贸易组织原则 (世贸组织) 信息, please see the iso.org/iso/foreword.html.

This document was prepared by Technical Committee ISO/TC 35, 油漆和清漆, 小组委员会SC 9, 油漆和清漆的常用测试方法.

ISO 中所有部件的列表 22553 系列可以在 ISO 网站上找到.

Any feedback or questions on this document should be referred to the user’s national standards body. A complete list of these institutions can be found at iso.org/members.html.

国际标准化组织 22553-3-2019 “用于油漆和清漆的电镀涂料 – 部分 3: 电镀涂料与参考油的相容性”

介绍

在实践中, surface reactive substances often contaminate the electrodeposited coating material in the tank. These contaminants can be materials used in downstream production processes, such as molding additives, anti-corrosion oils and chain lubricants.

These surface active substances can cause surface defects in electrophoretic coatings and/or subsequent coatings.

国际标准化组织 22553-4 describes test methods for determining the compatibility of electrodeposited coating materials with liquids, pastes and solid foreign bodies that affect the properties of electrodeposited coatings.

1 适用范围

The document specifies a method for determining the compatibility of electrodeposited coating materials with reference oils.

国际标准化组织 22553-3-2019 “用于油漆和清漆的电镀涂料 – 部分 3: 电镀涂料与参考油的相容性”

It is suitable for electrodeposition coatings in the automotive industry and other general industrial applications, such as chiller, consumer goods, radiators, 航天, 农业.

2 规范性引用文件

当文中引用下列文件时, 其中部分或全部构成本文件的要求. 对于注明日期的参考文献, 仅引用的版本适用. 对于未注明日期的引文, 参考文档的新版本 (包括任何修订) 适用.

国际标准化组织 1514, 油漆和清漆 – Standard boards for testing

国际标准化组织 2808, 油漆和清漆 – 薄膜厚度的测定

国际标准化组织 4618, 油漆和清漆 – 术语和定义

国际标准化组织 13076, 油漆和清漆 – 涂层视觉评估的照明和程序

国际标准化组织 22553-1, 油漆和清漆 – 电沉积涂料 – 部分 1: 词汇

国际标准化组织 23321, Paints and varnishes solventssoftening waters for industrial applications – 规格及测试方法

3 术语和定义

就本文件而言, ISO 中给出的术语和定义 4618, 国际标准化组织 22553-1 并且以下内容适用.

国际标准化组织 22553-3-2019 “用于油漆和清漆的电镀涂料 – 部分 3: 电镀涂料与参考油的相容性”

3.1 表面活性剂

When the concentration is very low, it will significantly affect the interface or surface tension of the substance

[来源: 国际标准化组织 2080:2008, 3.187]

仅标准信息部分是公开的. 查看完整内容, 需要通过官方渠道购买标准.

分享这个帖子