- 描述
- 询问
描述
乙设备介绍
M6610D四球摩擦试验机主要以滑动摩擦的形式来评价润滑油在极高点接触压力下的承载能力。有最大无咬合载荷PB等三个指标, 烧结负荷PD和综合磨损值ZMZ。该机还可用于润滑油的长时间耐磨性测试和摩擦系数的测量。当连接计算机时, 可以记录摩擦和温度曲线。如果使用特殊摩擦附件, 滚动摩擦试验, 各种材料之间的模拟磨损试验, 还可进行钢球的端面磨损试验和滚动疲劳试验。试验载荷达到最大无卡咬载荷PB前, 根据试验机控制软件完全可以判断没有达到最大无卡咬合载荷. 当负载达到最大无卡咬负载PB时, it can be determined by the display curve of the software that the load is the maximum no-card bite load PB.Thus precise measurements can be made with a microscope.Save a lot of time and material resources.And can edit the control program to load.
LR-M6610D microcomputer control four – ball friction wear testerFriction and wear testerLubricating oil friction and wear tester
Applicable standards of this machine:
GB/T12583-98 Determination of extreme pressure properties of lubricants (four-ball machine method)
GB3142-82 Determination of bearing capacity of lubricants (four-ball method)
SH/T0189-92 Test method for wear resistance of lubricating oil (four-ball machine method)
SH/T0202-92 Test method for extreme pressure performance of lubricating grease (four-ball machine method)
SH/T0204-92 Test method for wear resistance of grease (four-ball machine method)
SH/T 0762-2005| Lubricating oil friction coefficient measurement method (four-ball machine method)
ASTM D5183-2005 Test method for determination of friction coefficient of lubricating oil with a four-ball wear tester
在实际应用中, users can choose different determination methods and evaluation indexes according to different USES of lubricants.
主要技术规格:
The serial number | According to project name | |
1 | 试验力范围 (stepless adjustable) | 10N~10kN |
2 | Relative error of test force indication | ±1% |
3 | Keep the indication error when the test force is long | ±1%F.S |
4 | Friction test range | 0~300N |
5 | Friction test error | ±2% |
6 | Spindle speed range (stepless adjustable) | 100~2000r/min |
7 | Spindle speed error | ±10 r/min |
8 | Temperature control range of friction pair | At room temperature~200C |
9 | Temperature control error of friction pair | ±1C |
10 | Test time control range | 1 second to 99 小时 |
11 | Spindle speed control range | 1 〜 9999999 转速 |
12 | Installation dimensions | 1160mm×750mm×1640mm |
13 | 电脑显示并记录摩擦时间曲线, 温度-时间, 试验力-时间 | |
14 | 净重 | 800公斤 |
15 | 测试球 | 12.7毫米 |
16 | 电源 | 380V,.60赫兹( |
设备配件:
产品 | 主人 | 1 |
电脑, 打印机, 分析软件 | 每个 1 放 | |
磨损点测量实体显微镜 | 1 | |
塑机衣 | 1 | |
附件 | 防护罩 (有机玻璃和钢) | 每个 1 放 |
常温油箱 | 1 设置每个 (铂热电阻一套) | |
高温油箱 (包括加热器) |
类别 | 序列号 | 姓名 | 规格及数量 | 规格及数量
|
配件 | 1 | 扭力轮 (包括 8108 轴承) | 1 | 钢带 2 根
|
2 | 高温油箱座 | 1 |
| |
3 | BHR-7a300n, 50N负载传感器 | 每个 1 片 | 300 n 与主机
| |
4 | 筒夹夹头 | 4 |
| |
5 | 12.7 球四球机很特别 | 200 谷物 |
| |
6 | 电源插头及连接 | 1 一套 | 2米
| |
7 | 测量显微镜 | 1 | 包括 3 重新包装
| |
LR-M6610D microcomputer control four – ball friction wear testerFriction and wear testerLubricating oil friction and wear tester 逆变电源技术参数: 二相变三相电源DGBP | ||||
电路模式: IGBT/PWM调制 输出波形: 标准正弦波CF=1.4 输入电压: 1 阶段 2 + ground 220V±15% 50HZ/60HZ±3HZ 输出电压: 3-phase 4-wire + ground wire voltage 380V fixed Output current: phase current 16A Output frequency: 50HZ fixed /60HZ fixed / 40-70hz continuously adjustable Frequency stability: ≤ 0.05mm Load stabilization rate: ≤ 1 can Waveform distortion rate: ≤ 2 painfully (pure resistance load) Phase Angle: 120°±1° Peak factor ratio: 3:1 Panel display: output voltage, output current, output frequency, output power and output power factor (switch 展示) Protection functions: output overcurrent protection, overvoltage protection, overtemperature protection, 短路保护, self-diagnosis protection and reporting P device Protective response time: 2多发性硬化症 Machine efficiency: ≥ 87 Insulation withstand voltage: 1800VAC/10mA/1min Insulation resistance: 直流 500 v / 50 m Ω 冷却方式: forced air cooling 噪音: 1m less than 60db Operating environment temperature: 0~45℃ 相对湿度: 0〜 95% (non-condensation state) 尺寸: 430 * 770 * 990 (毫米) 重量: about 160KG |