- 描述
- 询问
描述
MFR MVR 熔体流动指数试验机
描述:
这是用于高精度熔体流动速率仪测试仪, 用于测试各种塑料, 树脂在一定温度和负荷下处于粘流状态, 每一个 10 最小模数和熔体流动速率通过标准端口的MFR/MVR值, 适用于聚碳酸酯的高温, 芳香族砜, 氟塑料, 尼龙工程塑料, 也可应用于聚乙烯 (聚乙烯醇), 聚苯乙烯 (聚苯乙烯), 聚丙烯 (聚丙烯), ABS树脂, 聚甲醛 (聚甲醛), 聚碳酸酯 (个人电脑) 熔融温度较低的树脂, 例如塑料测试, 广泛应用于塑料生产, 塑料制品, 石油化工及相关院校.
MFR MVR 熔体流动指数试验机
标准:
GB/T3682-2018、ISO1133-2011, ASTM1238-13
MFR MVR 熔体流动指数试验机
产品特性:
1.More paragraphs (3) temperature control method, three groups of platinum resistance sensor, the three heating jacket separate temperature control, high accuracy intelligent PID control, ramp rate the heating speed is adjustable
2.Resolution temperature was 0.1 ℃, the temperature fluctuation of not more than 0.5 ℃ within 24 小时, the displacement sensor resolution is 0.001 毫米.
Temperature and temperature protection device
3.手自动裁料, can be arbitrary set blanking time (0 〜 999), blanking times (0 〜 999)
4.Test can choose quality standard, or volume method, two test methods or simultaneously, and can calculate flow rate ratio.Both methods start testing when the piston rod moves to a certain location.
5.Can be set up in 240 秒 (GB3682 regulations) material preheat second countdown, after the end of the countdown, farmar automatically loaded, loaded to interval start automatic cutting, can also set the American standard (美国材料试验协会) preheating time, ETC.
6.Built-in many plastic material melt index test conditions, convenient customer used to be obtained at any time, reduce the tedious work, and storing the last test conditions and results
The internal microtyping machine is convenient for printing and testing data
7.High precision touch screen controller, 7 英寸触摸屏, can be stored and print test conditions and data recently, test print menu Settings include test time (the default), the material name, 测试条件 (温度, weight weight, blanking intervals), test results data.
8.Reserved RS232 interface or USB interface to connect computers, can through the computer control instrument operation and to save test data transmission to the computer,
9.Can manually loading weight or by stepping motor drives the ball screw rotation in order to achieve the purpose of automatic control at the top of the load weight increase or decrease
测试方法:MFR +MVR Methods
显示模式:中英文彩色触摸屏显示
规格
模型 | LR-A001-C |
料筒参数 | Inner hole 9.550±0.005mm length 163mm |
Pistons head parameters | 活塞头: 9.474±0.005mm |
Piston rod diameter | 8.94毫米 |
Mold length | 8.000±0.025mm |
Mold nominal inner diameter | 2.0955±0.0051mm
|
Half die length | 4.000±0.025mm |
Half die nominal inner diameter | 1.050±0.005mm |
温度参数 | 配有智能温控仪表, 具有四组显着温度设定控制, PID参数可自动设定, 精度高达± 0.1 摄氏度 |
温度范围 | Room Temperature~500degree centigrade |
温度波动 | ±0.2℃ |
温度均匀性 | ±1℃ |
温度显示分辨率 | 0.1℃ |
显示分辨率 | 0.1℃ |
最大消耗 | < 600瓦 |
时间显示分辨率 | 0.1s |
权重参数如下: | |
重量精度 | ±0.5% |
基本配置
| 0.325公斤 |
乙1.2公斤 | |
2.16公斤 | |
深3.8公斤 | |
5公斤 | |
氟10公斤 | |
克12.5公斤 | |
高21.6公斤 | |
位置检测 | |
上下循环距离 | 30毫米 |
控制精度 | ±0.1毫米 |
测试流程控制 | |
材料切割次数 | 0〜10次 |
材料切割间隔 | 0〜999秒(设置参考表 2) |
控制流量达到设定温度且无波动 | |
料筒温度时间 | 15 分钟. |
安装材料 | 1 分钟. |
材料样品温度恢复时间 | 4 分钟. |
当粘合剂凝固时 | 1分钟 |
输出方式 | 微型自动打印输出 |
切料方法 | 手自动切割成一体 |
试验负载 | 八组重量 |
力量 | AC220V±10% 50/60HZ |