在日常生活中, 我们熟悉按钮, 但我们不知道纽扣拉力试验机, 实际上, 可对服装上的多种纽扣进行均匀的垂直拉力测试, 测试其坚固程度是否符合相关安全标准. 大多数时候, 我们的衣服上有纽扣, 有时按钮会脱落, 这不仅让我们的衣服不雅观，还造成尴尬.

What is the role of the button tension testing machine?

尤其, shirts, buttons are very much, in order to let everyone do not affect the use of embarrassment, before the factory, many manufacturers will use button tension testing machine to test, if not easy to fall, then regarded as qualified. The purpose of the button tension test is to define the responsibility of the garment manufacturer to ensure that the buttons, buttons and fasteners are properly fastened to the garment and to prevent the buttons from coming off the garment and creating a risk of organic ingestion by infants. 所以, the buttons, 服装上的纽扣和紧固件必须通过纽扣强度测试仪进行测试. The machine can test the uniform vertical tension of the buttons on the clothing to check whether the degree can meet the relevant safety standards. Button tension machine is a very important standard for detecting the fixed strength of buttons and buttons, especially in the design and manufacturing of baby and children’s clothing.

What if the button falls off?

If the button is still in place, you can patch it up and sew it on with a needle. If a button falls out, you can go to a tailor’s shop and buy a new one and put it on. Mothers know that when buying clothes for their babies, they should pay special attention to the material and quality of the clothes. The baby’s skin is delicate and fragile, the clothing selection material is soft, good water absorption, good air permeability cotton or cotton wool fabric, and the suture can not be too hard. Generally good cotton surface has no defects, will not be particularly white, if the clothes are found to be particularly white, then it is likely to add fluorescent agents and other chemicals. Then choose the one without buttons.

Operation guide:

1. 安装夹具, 匹配测试按钮, 并将测试模板锁定在底座上

2. 放下夹具, hold the buttons and pull them up. Each set of buttons should be able to withstand the pull of z less 17 磅 (7.72公斤) 并应保留 10 seconds without any looseness or damage.

3. 如果其中一个按钮松动或损坏, 或者全部更换后必须重新测试.