- Description
- Inquiry
Description
I.Product Name:Surface Roughness Tester(SRT-6210)
This instrument is compatible with four standards of site to measure surface roughness of various machinery-processed parts, calculate corresponding and clearly display all measurement parameters.
Multiple parameter measurement: Ra, Rz, Rq, Rt
Highly sophisticated inductance sensor
Four wave filtering methods : RC, PC-RC,GAUSS and D-P
Built-in lithium ion rechargeable battery and control circuit with high capacity
Small in size, light in weight and easy to use
Can communicate with PC computer for statistics,printing and analyzing by the optional cable and the software for RS232C interface.
Manual or automatic shut down. The tester can be switched off by pressing the Power key at any time.On the other hand, the tester will power itself off about 5 minutes after the last key operation.
The tester can memorize 7 groups of measurement results and measuring conditions for later use or download to PC.
Metric /Imperial Conversion
II.Specifications:
Display: 4 digits, 10 mm LCD, with blue backlight
Parameters: Ra, Rz, Rq, Rt
Measuring Range
Ra, Rq: 0.005-16.00um/0.020-629.9uinch
Rz,Rt: 0.020-160.0um/0.078-6299uinch
Accuracy: Not more than 10%
Fluctuation of display value: Not more than 6%
Sensor:Test Principle: Inductance type,
Radius of Probe Pin: 5um,
Material of Probe Pin: Diamond,
Dynamo-measurement of Probe: 4mN(0.4gf),Probe Angle: 90
Vertical Radius of Guiding Head: 48mm
Maximum driving stroke: 17.5mm/0.7inch
Cutoff length (l): 0.25mm / 0.8mm / 2.5mm optional
Evaluation length: 5l
Resolution : .001um if reading less than 10um Evaluation length : 5 cut-off
0.01um if reading more than 10um but less than 100um
0.1um if reading more than 100um
Power Li-ion battery: rechargeable
Operating conditions:Temp. 0~50centidegree
Humidity <80%
Size:140x57x48 mm (5.5×2.2×1.9 inch)
Weight:approx 420 g