Dispersing machine mixing may be caused by the following reasons:

Power problem: First, check whether the power supply of the dispersing machine is normal. Make sure that the power outlet is securely connected, that the plug is not loose or damaged, and that the power cord is not broken or damaged.

Switch problem: Check whether the switch of the dispersing machine is open. Some dispersers may be equipped with multiple switches, such as a main power switch and a stirring start switch. Make sure all necessary switches are turned on to activate the mixing device.

Motor failure: The mixing device of the dispersion machine is driven by the motor, and if there is a fault in the motor itself, such as damaged windings, circuit failures or motor overload, the mixing may not turn. At this time, you need to contact professional maintenance personnel to repair or replace the motor.

Dispersing machine mixing does not turn what is going on?

Transmission parts problems: the transmission parts of the dispersion machine, such as belts, gears, couplings, etc., if there are loose, broken or wear problems, it may lead to mixing does not turn. Check whether the transmission parts are normal and repair or replace the damaged parts.

Stirring device blockage: Sometimes, the stirring device may not turn properly due to solid particles, residues, or blockages in the liquid sample. Clean the stirring unit to ensure unhindered rotation.

If the above inspection methods cannot solve the problem, it is recommended to contact the distributor supplier or relevant maintenance service personnel for more detailed troubleshooting and maintenance operations. Please note that before performing any service or overhaul, always disconnect the power supply and follow the relevant safe operating procedures.