paunang salita
ISO (International Organization para sa Standardisasyon) ay ang pandaigdigang pederasyon ng mga pambansang pamantayan ng katawan (Mga katawan ng miyembro ng ISO). Ang pagbuo ng mga internasyonal na pamantayan ay karaniwang isinasagawa sa pamamagitan ng ISO teknikal na komite. Each member group interested in a subject on which a technical committee has been established has the right to be represented on the Committee. International, governmental and non-governmental organizations in liaison with ISO are also involved in this work. ISO ay gumagana nang malapit sa International Electrotechnical Commission (IEC) sa lahat ng bagay ng electrical standardization.

Bahagi 1 ng ISO / IEC Directive ay naglalarawan ng mga pamamaraan na ginamit upang bumuo ng dokumentong ito at para sa karagdagang pagpapanatili. Sa partikular na, tandaan ang iba't ibang mga pamantayan sa pag apruba na kinakailangan para sa iba't ibang uri ng mga dokumento ng ISO. This document has been drafted in accordance with the editorial rules in Part 2 ng Direktiba ng ISO / IEC (tingnan iso.org/directives).

Mangyaring tandaan na ang ilang mga elemento ng dokumentong ito ay maaaring maging paksa ng mga karapatan sa patent. Ang ISO ay hindi mananagot para sa pagtukoy ng anuman o lahat ng naturang patente. Details of any patent rights identified during the documentation development process will be included in the introduction and/or list of ISO patent claims received (tingnan iso.org/patents).

Ang anumang mga pangalan ng kalakalan na ginamit sa dokumentong ito ay impormasyong ibinigay para sa kaginhawahan ng gumagamit at hindi bumubuo ng isang endorsement.

For an explanation of ISO specific terms and expressions related to conformity assessment, as well as information on ISO compliance with WTO principles in Technical Barriers to Trade (TBT), see the following URL: Paunang salita – Supplementary Information

Ang komite na responsable para sa dokumentong ito ay ISO / TC 256, Mga pigments, Dyes and increments.

ISO 18473 consists of the following parts under the general heading Functional pigments and increments for special applications:

— Bahagi 1: Nanometer calcium carbonate for sealant applications

— Bahagi 2: Nanoscale titanium dioxide for sunscreen applications

ISO 18473-1-2015 Functional pigments and fillers for special purposes – Bahagi 1: nano-sized calcium carbonate for sealant applications

ipakilala ang
Sealants are widely used to prevent air, gas or liquid infiltration into many industries, kasama na ang konstruksiyon, automobiles and electronics. Increments are an important component of sealant formulations that reduce cost and improve rheological and mechanical properties. The content of increment agent varies widely and can be as high as 50% (mass fraction). A common additive in sealants is calcium carbonate (CaCO 3) because it is readily available in a variety of sizes and can be used as a rheological modifier, enhancer, and sunblock. Commercial calcium carbonate can be divided into heavy calcium carbonate (GCC) and precipitated calcium carbonate (PCC), with three crystal structures of calcite, aragonite and spheroid aragonite. It exists in various forms, such as cubic, spherical, spindle, fibrous and acicular. Calcium carbonate with calcite crystal structure and cubic or spherical form is most widely used in sealant applications.

Nanoscale calcium carbonate (NCC) provides improved performance and additional features for a variety of sealants, including thixotropy, flame retardant, and improved durability and recyclability, and has become a major ingredient in sealant formulations. Nanoscale calcium carbonate in powder form is now easy to manufacture, mainly through the precipitation route to control size and form. The importance of surface treatment for the use of NCC in sealants cannot be overstated. Natural calcium carbonate 3 is hydrophilic. As a result, it tends to clump in organic polymers and plasticizers. NCCS, in particular, tend to aggregate more easily due to their small size and large surface area. NCCS are surface treated to give them hydrophobicity and improve their dispersion in hydrophobic systems. The surface treatment also improves the compatibility of the polymer matrix, thus improving the interface adhesion between the increment agent and the polymer.

It was found that the particle size, specific surface area, mass fraction, morphology, Halaga ng pH, magnesium content, oil absorption value, water content and other characteristics of the supplied nano-sized calcium carbonate affected the performance of the sealant mixed with these materials. Nanoparticles. The characteristics of NCCS that need to be detailed in relation to sealant performance arise from the following facts. Una, agreements between customers and suppliers do not always cover all material characteristics that affect sealant performance and/or machinability, or they are interpreted differently by customers and suppliers. Pangalawa, nanomaterials are relatively new. Material properties may depend on the technique used to measure them. So,

Ang bahaging ito ng ISO 18473 lists the properties, measurements and characteristics of nanoscale calcium carbonate and is intended to aid its acceptance and application in sealants.

1 Saklaw ng aplikasyon
Ang bahaging ito ng ISO 18473 specifies the requirements and corresponding test methods for powdered nano-sized calcium carbonate for surface treatments used in sealant applications.

2 Normative reference files
All or part of the following documents are conventionally referenced in this document and are required for the application of this document. Para sa mga petsang sanggunian, angkop ang mga bersyon na may pagbanggit lamang. Para sa mga walang petsang pagbanggit, isang bagong bersyon ng referenced dokumento (including any amendments) angkop.

ISO 787-2, General test methods for pigments and increments-Part 2: Determination of volatiles at 105 °C

ISO 787-5, General test methods for pigments and increments – Bahagi 5: Determination of oil absorption values

ISO 787-9, General test methods for pigments and increments-Part 9: Determination of the pH value of aqueous suspensions

ISO 3262-1, coating increments — Pagtutukoy at mga pamamaraan ng pagsubok — Bahagi 1: Introduction and general test methods

ISO 3262-6, paint increments-specification and test methods-Part 6: Precipitated calcium carbonate

– ISO 9277, Determination of specific surface area of solids by gas adsorption – BET method

ISO 15528, Mga Pintura, mga barnis at hilaw na materyales para sa mga pintura at barnis – Pag sampling

ISO 18473-1-2015 Functional pigments and fillers for special purposes – Bahagi 1: nano-sized calcium carbonate for sealant applications

3 Mga Tuntunin at Kahulugan
For the purposes of this part of ISO 18473, Ang mga sumusunod na termino at kahulugan ay nalalapat.

3.1 Nanoscale

Sizes range from approximately 1 nm na to 100 nm

Tala ng Pagpasok 1: Attributes that are not extrapolated from a larger size are usually (but not limited to) displayed within this size range. For such attributes, the size limit is considered to be approximate.

Tala ng Pagpasok 2: The lower limit in this definition (approximately 1 nm) was introduced to avoid the designation of individual and small atomic groups as nanoobjects or nanostructured elements, which may imply that there is no lower limit.

3.2 Precipitate calcium carbonate

A synthetic calcium carbonate composed of triangular crystals (e.g., calcite) or diamond-shaped biconical crystals (e.g., aragonite)

Ang standard information section lamang ang pampubliko. Upang makita ang buong nilalaman, you will need to purchase the standard through the official channels.