ISO 10601-2007 “מפרטים ושיטות בדיקה לפיגמנטים של תחמוצת ברזל נציץ לצבעים”

מבוא
ISO (הארגון הבינלאומי לתקינה) היא ברית גלובלית של גופי תקינה לאומיים (גופים חברי ISO). פיתוח תקנים בינלאומיים מתבצע בדרך כלל באמצעות ועדות טכניות של ISO. כל מוסד חבר המעוניין בנושא שעליו הוקמה ועדה טכנית זכאי להיות מיוצג באותה ועדה. ארגונים ממשלתיים ולא-ממשלתיים בינלאומיים המקיימים קשר עם ISO מעורבים גם הם בעבודה זו. ISO עובד בשיתוף פעולה הדוק עם הנציבות האלקטרוטכנית הבינלאומית (חברת החשמל) בכל הקשור לתקינה חשמלית.

תקנים בינלאומיים מנוסחים בהתאם לכללים המפורטים בחלק 2 של הוראת ISO/IEC.

המשימה העיקרית של הוועדה הטכנית היא לפתח תקנים בינלאומיים. טיוטת התקן הבינלאומי שאומצה על ידי הוועדה הטכנית תופץ לגופים החברים להצבעה. פרסום כתקן בינלאומי דורש אישור של לפחות 75% של מוסדות חברים.

שים לב שרכיבים מסוימים במסמך זה עשויים להיות כפופים לזכויות פטנט. ISO אינה אחראית לזיהוי פטנטים כאלה או כולם.

ISO 10601-2007 “מפרטים ושיטות בדיקה לפיגמנטים של תחמוצת ברזל נציץ לצבעים”

ISO 10601 פותח על ידי הוועדה הטכנית ISO/TC 35, צבעים ולכות, ועדת המשנה SC 2, Pigments and fillers.

The second edition cancelled and replaced the technically revised first edition (ISO 10601:1993).

The main technological changes are:

א) The grade description has been changed to remove thenon-layered” כיתה;

ב) The requirements for residue on the sieve have been changed.

ISO 10601-2007 “מפרטים ושיטות בדיקה לפיגמנטים של תחמוצת ברזל נציץ לצבעים”

הצג
Mica iron oxide pigments were previously included in ISO 1248 (classified asgrey, metallic luster”), but were explicitly excluded in a revision published in 2006. In the revised version of ISO 10601, the requirements for mica iron oxide pigments are more clearly defined and relate to what is essentially a layered particle shape.

Mica iron oxide pigments vary in composition, particle size range and particle shape, depending on whether they are synthetic produced or refined natural oxides, depending on where the ore is mined.

The main use of mica iron oxide is the protective coating of steel structures, in order to obtain better performance, the pigment should have a high content of flaky particles. The protective effect is attributed to the tight packing of pigment flakes within the paint film, forming overlapping layers that are roughly parallel to the substrate. This hinders the penetration of corrosion promoters, reduces UV degradation of the adhesive, and improves the oil film strength. For less important requirements, mica iron oxide pigments with lower flake content may be acceptable. לָכֵן, in this standard, mica iron oxide pigments are divided into two groups based on sheet content determined by microscopic examination (see Table 1).

For the purposes of this Standard, pigments with a layered particle content of less than 50% are not consideredmicaor classified aslayered”.

ISO 10601-2007 “מפרטים ושיטות בדיקה לפיגמנטים של תחמוצת ברזל נציץ לצבעים”

1 טווח
This standard specifies the requirements and corresponding test methods for dry man-made and natural mica iron oxide (MIO) pigments primarily used for protective coatings on steel structures.

In accordance with current practice, the general requirements for mica iron oxide pigments have been subdivided

א) Those required requirements (see Table 2)

ב) Requirements conditional on the prior agreement of the interested parties (see table 3).

במקרים מסוימים, an agreed reference pigment may be used.

2 אזכור נורמטיבי
The following reference files are required for the application of this document. להפניות מתוארכות, רק הגרסה המצוטטת חלה. להפניות ללא תאריך, גרסה חדשה של ההפניה (כולל כל תיקונים) חל.

ISO 150, גלם, refined and cooked flaxseed oil for paints and varnishes – מפרט ושיטות בדיקה

ISO 787-2, שיטות בדיקה כלליות לפיגמנטים וחומרי מילוי – חֵלֶק 2: קביעת חומרים נדיפים ב-105 מעלות צלזיוס

ISO 787-3, שיטות בדיקה כלליות לפיגמנטים וחומרי מילוי – חֵלֶק 3: קביעת חומרים מסיסים במים – שיטת מיצוי חמה

ISO 787-5, שיטות בדיקה כלליות לפיגמנטים וחומרי מילוי – חֵלֶק 5: Determination of oil absorption values

ISO 10601-2007 “מפרטים ושיטות בדיקה לפיגמנטים של תחמוצת ברזל נציץ לצבעים”

ISO 787-9, Common test methods for pigments and fillers – חֵלֶק 9: Determination of the pH value of water suspensions

ISO 1248, iron oxide pigments – מפרטים ושיטות בדיקה

ISO 3549, zinc powder pigments for paints – מפרטים ושיטות בדיקה

ISO 15528, צבעים, לכות וחומרי גלם לצבעים ולכות – דְגִימָה

3 מונחים והגדרות
למטרות מסמך זה, המונחים וההגדרות הבאים חלים.

3.1 Mica iron oxide pigment

Refined minerals (also known as specular hematite) or manufactured products consisting primarily of iron oxide (III) Fe2O3, which are gray in color, have a metallic luster and are composed primarily of particles having a layered form

רק מדור המידע הסטנדרטי הוא ציבורי. לצפייה בתוכן המלא, אתה צריך לרכוש את התקן דרך הערוצים הרשמיים.

שתף את הפוסט