Astratto

This specification covers film, tipi di carta e tessuto di nastri sensibili alla pressione e vengono applicati all'imballaggio, box LIDS and seals. This specification covers five types of tape: impermeabile, weather-resistant, polyester-supported tape (Tipo I), water-resistant polyester-supported tape (Type II), water-resistant polypropylene supported tape (Tipo III), water-resistant woven fabric straps (Type IV) and weather-resistant paper straps. Tape should be manufactured using film, paper or cloth as backing and coated with a smooth and evenly distributed layer of pressure-sensitive water-insoluble adhesive. The tape should be rolled over the paper fiber or plastic core, and should be free of defects, and the edge should be clean, straight and unbroken. Test adhesion, forza di rottura, tear resistance, spessore, water permeability,

This summary is a brief summary of the reference standards. It is informational only and not a formal part of the standard; The full text of the standard itself needs to be used and applied for reference. ASTM provides no warranties, espresso o implicito, e non garantisce che il contenuto di questo abstract sia accurato, complete, or new.

Fare un passo 1: Scopo

1.1 This specification covers film, paper and cloth pressure sensitive tape for box closure and sealing.

1.2 Values expressed in inch-pounds or SI units shall be treated as standards separately. I valori specificati in ciascun sistema potrebbero non essere esattamente gli stessi; Perciò, each system needs to be used independently and the values cannot be combined in any way.

1.3 The following safety hazard warnings apply only to Section 14 “Metodi di prova” of this specification. Questo standard non è destinato ad affrontare tutti i problemi di sicurezza associati al suo utilizzo. È responsabilità degli utenti di questo standard stabilire una sicurezza adeguata, specifiche sanitarie e ambientali e per determinare l'applicabilità delle restrizioni normative prima dell'uso.

1.4 Questo standard internazionale si basa su principi di standardizzazione riconosciuti a livello internazionale stabiliti nella Decisione sui principi per lo sviluppo di standard internazionali, Linee guida e raccomandazioni emanate dall'OMC Ostacoli tecnici al commercio (TBT) Comitato.

ASTM D5486/D5486M-2020 “Specifiche standard per nastri sensibili alla pressione per imballaggi, COPERCHI e sigilli per scatole”

2. Fare riferimento al dossier

Federal regulation

FED-STD-595

PPP-T-60 Tape: Packaged, waterproof available from the Standardization document ordering desk Bldg. 4 D Block, 700 Robbins Ave., Philadelphia, PAPÀ 19111-5094, Attn: NPODS.

TAPPI standard

Internal Tear Resistance of T 414 carta (Elmendorf-type method) is available from the Pulp and Paper Industries Association (TAPPI), 15 Technology Parkway South, Norcross, GA 30092, http:// www.tappi.org.

Norma ASTM

D996 Termini ambientali relativi all'imballaggio e alla distribuzione

D1974 Practice of methods for sealing, sealing and reinforcing fiberboard boxes

D2860 / D2860M Test method for bonding pressure-sensitive tape to fiberboard at a 90 degree Angle and under constant stress

Test method for peel adhesion of D3330 / D3330M pressure sensitive tape

D3611 pressure sensitive tape accelerated aging practice

Test method for thickness of D3652 / D3652M pressure sensitive tape

Test method for shear adhesion of D3654 / D3654M pressure sensitive tape

D3715 / Pratica di garanzia della qualità del nastro sensibile alla pressione D3715M

Test method for breaking strength and elongation of D3759 / D3759M pressure sensitive tape

Test method for unwinding force of D3811 / D3811M pressure sensitive tape

D3815 / D3815M Practice of accelerating weathering of pressure sensitive tape through open flame carbon arc exposure equipment

Test method for water permeability of D3816 / D3816M pressure sensitive tape

Test method for water vapor transmittance of D3833 / D3833M pressure sensitive tape

D3951 Commercial packaging specification

D4727 / D4727M Specification for corrugated and solid fiberboard sheets (container grade) and cut shapes

D5570 used as a test method for water resistance of tapes and adhesives for box covers