ASTM D5486/D5486M-2020 “Standard Specification for Pressure Sensitive Tapes for Packaging, Box LIDS and Seals”
Abstract
This specification covers film, paper and cloth types of pressure sensitive tape and is applied to packaging, box LIDS and seals. This specification covers five types of tape: waterbestendig, weather-resistant, polyester-supported tape (Type ik), water-resistant polyester-supported tape (Type II), water-resistant polypropylene supported tape (Type III), water-resistant woven fabric straps (Type IV) and weather-resistant paper straps. Tape should be manufactured using film, paper or cloth as backing and coated with a smooth and evenly distributed layer of pressure-sensitive water-insoluble adhesive. The tape should be rolled over the paper fiber or plastic core, and should be free of defects, and the edge should be clean, straight and unbroken. Test adhesion, breaking strength, tear resistance, dikte, water permeability,
Deze samenvatting is een korte samenvatting van de referentienormen. Het is alleen informatief en geen formeel onderdeel van de standaard; The full text of the standard itself needs to be used and applied for reference. ASTM biedt geen garanties, expliciet of impliciet, en betekent niet dat de inhoud van deze samenvatting accuraat is, compleet, of nieuw.
Stap 1: Domein
1.1 This specification covers film, paper and cloth pressure sensitive tape for box closure and sealing.
1.2 Values expressed in inch-pounds or SI units shall be treated as standards separately. The values specified in each system may not be exactly the same; Daarom, each system needs to be used independently and the values cannot be combined in any way.
1.3 The following safety hazard warnings apply only to Section 14 “Test Methods” of this specification. Deze norm is niet bedoeld om alle veiligheidsproblemen in verband met het gebruik ervan weg te nemen. Het is de verantwoordelijkheid van de gebruikers van deze norm om de juiste veiligheid te garanderen, gezondheids- en milieuspecificaties en om vóór gebruik de toepasbaarheid van wettelijke beperkingen vast te stellen.
1.4 Deze internationale norm is gebaseerd op internationaal erkende standaardisatieprincipes die zijn vastgelegd in het Besluit over de beginselen voor de ontwikkeling van internationale normen, Richtlijnen en aanbevelingen uitgegeven door de WTO Technical Barriers to Trade (TBT) Commissie.
ASTM D5486/D5486M-2020 “Standard Specification for Pressure Sensitive Tapes for Packaging, Box LIDS and Seals”
2. Raadpleeg het bestand
Federal regulation
FED-STD-595
PPP-T-60 Tape: Packaged, waterproof available from the Standardization document ordering desk Bldg. 4 D Block, 700 Robbins Ave., Philadelphia, VADER 19111-5094, Attn: NPODS.
TAPPI standard
Internal Tear Resistance of T 414 papier (Elmendorf-type method) is available from the Pulp and Paper Industries Association (TAPPI), 15 Technology Parkway South, Norcross, GA 30092, http:// www.tappi.org.
ASTM-standaard
D996 Milieuvoorwaarden verpakking en distributie
D1974 Practice of methods for sealing, sealing and reinforcing fiberboard boxes
D2860 / D2860M Test method for bonding pressure-sensitive tape to fiberboard at a 90 degree Angle and under constant stress
Testmethode voor afpeladhesie van D3330 / D3330M drukgevoelige tape
D3611 pressure sensitive tape accelerated aging practice
Test method for thickness of D3652 / D3652M pressure sensitive tape
Test method for shear adhesion of D3654 / D3654M pressure sensitive tape
D3715 / D3715M pressure sensitive tape quality assurance practice
Test method for breaking strength and elongation of D3759 / D3759M pressure sensitive tape
Test method for unwinding force of D3811 / D3811M pressure sensitive tape
D3815 / D3815M Practice of accelerating weathering of pressure sensitive tape through open flame carbon arc exposure equipment
Test method for water permeability of D3816 / D3816M pressure sensitive tape
Test method for water vapor transmittance of D3833 / D3833M pressure sensitive tape
D3951 Commercial packaging specification
D4727 / D4727M Specification for corrugated and solid fiberboard sheets (container grade) and cut shapes
D5570 used as a test method for water resistance of tapes and adhesives for box covers