ISO 17872-2019 – Primergids voor het markeren met verf en lak op plaatmetaalcoatings voor corrosietesten

Een voorwoord
ISO (Internationale Organisatie voor Standaardisatie) is een mondiale alliantie van nationale normalisatie-instellingen (ISO-lidorganisaties). De ontwikkeling van internationale normen wordt doorgaans uitgevoerd via technische ISO-commissies. Elke aangesloten instelling die geïnteresseerd is in een onderwerp waarover een technische commissie is opgericht, heeft het recht om in de commissie vertegenwoordigd te zijn. Gouvernementele en niet-gouvernementele internationale organisaties die contact onderhouden met standaardisatieorganisaties zijn ook bij dit werk betrokken. ISO werkt nauw samen met de Internationale Elektrotechnische Commissie (IEC) over alle kwesties van elektrische standaardisatie.

De procedures die zijn gebruikt om dit document te ontwikkelen, evenals de procedures die voor verder onderhoud zijn gebruikt, worden beschreven in Deel 1 van de ISO/IEC-richtlijn. In het bijzonder, Er moet aandacht worden besteed aan de verschillende goedkeuringscriteria die vereist zijn voor verschillende soorten ISO-documenten. Dit document is opgesteld in overeenstemming met de redactieregels van Deel 2 van de ISO/IEC-richtlijn (zie iso.org/directives).

ISO 17872-2019 – Primergids voor het markeren met verf en lak op plaatmetaalcoatings voor corrosietesten

Houd er rekening mee dat bepaalde inhoud van dit document onderhevig kan zijn aan patentrechten. ISO is niet verantwoordelijk voor het identificeren van een of meer van dergelijke octrooirechten. Details van eventuele patentrechten die tijdens de ontwikkeling van het document zijn geïdentificeerd, staan ​​in de inleiding en/of in de ISO-lijst met ontvangen patentclaims (zie iso.org/patents).

Alle handelsnamen die in dit document worden gebruikt, worden verstrekt ter informatie voor het gemak van de gebruiker en houden geen goedkeuring in.

Vrijwillig, related standards and conformity assessment related ISO specific terminology and express the meaning of and the ISO in the technical barriers to trade (TBT) zich houden aan het principe van de Wereldhandelsorganisatie (WTO) informatie, please see the iso.org/iso/foreword.html.

This document is prepared by Technical Committee ISO/TC 35, Verven en vernissen, Subcommissie SC 9, General Test methods for paints and varnishes.

De tweede editie annuleert en vervangt de technisch herziene eerste editie (ISO 17872:2007). Compared with the previous edition, the main changes are as follows:

– Artikel 2 “Normative referenceand Article 3 “termen en definities” have been added;

Added L-shaped and diagonal scribe graphics;

ISO 17872-2019 – Primergids voor het markeren met verf en lak op plaatmetaalcoatings voor corrosietesten

A second variant of the cross-section shape marked with a U-dot is added to Figure 2;

V-shaped replaceable inserts, disc milling cutters, engravers and ceramic cutters have been added to the list of possible cutting tools;

The cross section picture has been added to the corresponding cutting tool;

Examples of cutting tools in Table A.1 have been grouped into knife or insert tools, pencil tools, and milling machines;

The original Appendix B has been replaced by a new annex that presents examples of the different results that may occur in a corrosion test when different marking tools are used.

Any feedback or questions regarding this document should be directed to the user’s national standards body. A full list of these agencies can be found at iso.org/members.html.

ISO 17872-2019 – Primergids voor het markeren met verf en lak op plaatmetaalcoatings voor corrosietesten

Invoering
Many international standards deal with corrosion tests in which scribe marks are introduced through coatings on metal substrates. Echter, the methods introduced by the underline mark (underline patterns, hulpmiddelen, enz.) are not standardized in these standards.

The main purposes of deliberately causing damage to the coating prior to corrosion testing are as follows:

1) Simulate and study how to ensure the adhesion of coating caused by damage after exposure;

B) Obtain an accelerated response during corrosion testing, such as quality control in the production process;

C) Study the general durability of the coating by observing the corrosion rate as damage spreads after exposure.

Preliminary investigations indicated the use of several scribing tools in terms of shape and size. These differences occur both between and within countries. The effect of using different tools is to produce streaking marks with different cross-section shapes, depths and bare metal areas. These differences will greatly affect the test results obtained during the corrosion test, as the purpose of introducing the marking into the coating system is to enable the oxygen and electrolytes present during the exposure test to enter the well-defined and active metal surface.

The actual method used to introduce scribble marks depends on the coating type and thickness. Echter, in all cases, the recommendation is that the cross section be as smooth as possible, the metal substrate be evenly exposed, and there is no coating residue on the exposed substrate.

ISO 17872-2019 – Primergids voor het markeren met verf en lak op plaatmetaalcoatings voor corrosietesten

1 Domein
This document describes a method for performing corrosion tests on scrip-coated steel or specimens, where the coating system is applied at a dry film thickness of less than 500 urn. It is only used as a guide, based on the results of cooperative tests, and no subsequent corrosion tests are conducted to determine whether the introduced scribe marks are suitable for such tests.

This document covers the marking of metal panels or test pieces (chemically or non-chemically treated) made of:

– Staal;

galvanized steel;

– aluminium profiel;

Magnesium alloy.

It does not include the streaking of electroplated metal or composite aluminum plates.

2 Normatieve verwijzingen
Er wordt in de tekst op zodanige wijze naar de volgende documenten verwezen dat de inhoud ervan geheel of gedeeltelijk aan de vereisten van dit document voldoet. Voor gedateerde referenties, alleen de geciteerde versie is van toepassing. Voor ongedateerde referenties, de nieuwe versie van de referentie (inclusief eventuele herzieningen) is van toepassing.

ISO 4618, Verven en vernissen — termen en definities

ISO 17872-2019 – Primergids voor het markeren met verf en lak op plaatmetaalcoatings voor corrosietesten

3 termen en definities
Voor de doeleinden van dit document, de termen en definities gegeven in ISO 4618 toepassen.

ISO en IEC onderhouden terminologiedatabases voor standaardisatie op de volgende adressen:

– ISO online browserplatform: beschikbaar op iso.org/obp

– IEC elektronische encyclopedie: beschikbaar op electropedia.org/

Alleen de standaardinformatiecomponent is openbaar beschikbaar. Om de volledige inhoud te zien, u zult de normen via formele kanalen moeten aanschaffen.

Deel dit bericht