LR1000 Portable Vibration Recorder



LR1000 Portable Vibration Recorder

LR1000 uses piezoelectric acceleration transducer to convert vibration signal into electric signal. Then by analyzing input signal, results including RMS of velocity values, peak-peak value of displacement, peak values of acceleration or real-time spectral charts are displayed or printed out. It can not only measure the three parameters, but also rocord real time vibration curve.

The vibration meter is designed to test conventional vibration, especially the vibration test in rotating and reciprocating machines. It can be used not only to test the acceleration, velocity, and displacement of vibration as well as rev (or inherent frequency), but also perform simple failure diagnosis.

Built in iso10816 fault diagnosis standard, which can automatically diagnose the fault of the tested equipment.

The technical specifications of LV1000 comply with the requirements of GB 13823.3. LV1000 is widely used in machinery, power, metallurgy, automobile and other industrial fields.

LR1000 Portable Vibration Recorder


Standard configurationNO.ItemQuantity
1Main uni.1
2Power Adapters:output:5V/1000mA1
3Piezoelectric sensors1
4Magnetic seat1
6Package case1
Optional configuration3Probe1
4Communication cable1

LR1000 Portable Vibration Recorder



Testing range


Acce: 0.1 ~ 400.0m/s2(peak)

Velo: 0.1 ~ 400.0mm/s(RMS)

Disp: 0.001 ~ 4.000mm(peak-peak)

Freq rangeAcceleration:  10Hz ~ 1KHz, 1K Hz ~ 10KHz

Velocity:      10Hz ~ 1KHz

Displacement: 10Hz ~ 500Hz

Data memory150 ×100 pieces of patrol data

30 ~ 480 pieces of record data

Temp0℃ ~ 40℃
DisplayTFT:2.8”,320×240 pixels with RGB
Data interfaceUSB(RS232/RS485),Bluetooth
Overall dimensions140×76×28
PrinterWireless Bluetooth printer(Optional)
BatteryRechargeable Li battery,2000mAh
Continuous working timeContinuous operation for about 20 hours, Standby for 80 hours


    has been added to your cart: